Lifted 2013 Yukon slt 4x4

[nshift]

thanks
Yea possibly but you should be good if you do have to trim it’ll be on the lower bumper valence or inner fender liner so it wouldn’t be noticeable or seen.

I trimmed my fender liner my inner cab corner and my front bumper

One more question good sir, would I still have to use a front leveling kit with the lift?

 

[Trey Hardy]

It should be at 7.5” from RC but you can stretch it to 9” and still get proper alignment with some upper control arms

 

[nshift]

It should be at 7.5” from RC but you can stretch it to 9” and still get proper alignment with some upper control arms

One more stupid question if you don't mind me asking. What bolt pattern am I looking for? 6x5.5? I thought I had that figured out but some web pages says "that wont fit your 2013 yukon" thank you

 

[Trey Hardy]

One more stupid question if you don't mind me asking. What bolt pattern am I looking for? 6x5.5? I thought I had that figured out but some web pages says "that wont fit your 2013 yukon" thank you

Yes 6x5.5 is our lug pattern

 

[Charlie207]

FYI, you can fit 33" on a stock Yukon SLT. I had 33" BFG KO2s on stock suspension, and then added a 2" front leveling kit.

 

[Tozan]

I run 35's on mine with a 4 inch lift...