Lifted/Leveled 2021 - Postem Up

[ProfeZZor X]

What’s the offset on those?? That’s a good looking Yukon. What’s kind of rubbing and trimming did you need to do?

The offset on my 24x14's are -76. I knew what I was getting into a couple of years ago before I even ordered these wheels. I just didn't like the "flush" look on current gen Yukon/Tahoes, and wanted to do something different. I did have to cut away some of the wheel well closer to the bottom, but otherwise, it turns just fine.

The only thing I'm waiting for now is for my current tread to wear down so I can upgrade my tires to 35's. I should have done it the first time around, but I found myself listening to too many haters and decided to play it safe by getting 33's.

 

[A10MileHusker]

I'm not sure the specifics of your ride (I have a 22 Yukon AT4 w/ Magnaride) and I missed the memo that you need the Magnaride relocation bracket. So I just ordered that and now delayed another week until that arrives.

Just wanted to give a heads up to you and anyone who might be considering this.

No you dont. At least not with my wifes ‘22 high country.

Post pics of the bracket…links…or whatever it is. I couldnt even find it when i installed the kit on hers.

To update this, Went to install my Motofab 1" level lift on my 22 and confirmed I did NOT need the bracket that Motofab said I did.

But do love the 1". Leveled my AT4 perfectly.

 

[H1Chester]

To update this, Went to install my Motofab 1" level lift on my 22 and confirmed I did NOT need the bracket that Motofab said I did.

But do love the 1". Leveled my AT4 perfectly.
View attachment 396606

Your AT4 should have come level from the factory. My 2022 Z71 did. Rear wheel well is only .25” higher than the front on stock non air ride.

 

[A10MileHusker]

Your AT4 should have come level from the factory. My 2022 Z71 did. Rear wheel well is only .25” higher than the front on stock non air ride.

I can't keep it all straight. I talked with another company who said the same thing, your AT4 is already lifted and lifting more will cause more stress on CVs.
But there was no way mine was.

 

[H1Chester]

I can't keep it all straight. I talked with another company who said the same thing, your AT4 is already lifted and lifting more will cause more stress on CVs.
But there was no way mine was.

@A10MileHusker i honestly didn’t believe it at first. Last year I read a post on a thread on this forum that said that the Z71’s come from factory already level. I went out to my driveway and checked myself. I only have a quarter inch of “rake”. I would have to dig for the thread (maybe earlier on this very thread) but a few other members chimed in saying they measured their stock rigs and same, only about .25” difference. The people who put a front level on their rig were puzzled that the front was now slightly higher than the rear… So yes you can lift your truck but a front level on a 21+ Z71 = “Carolina Squat”.

 

[Nokturnal]

3.5 RC
Amp steps
20x9 Fuel Quakes (+1mm)
35x12.5x20 BFG KO2
Chrome delete (minus front Chevy and rear bow tie)
Painted tow hooks and skid plate
Debadge
5% Ceramic Tint

 

[Nokturnal]

More pics

 

[Nokturnal]

Fenders trimmed and one more of powder coated Quake. Zero rub.

 

[Nokturnal]

Didn’t realize how easy it is to pop off bow ties with interior trim tool! Black out complete front and back.

 

[Nokturnal]

More angles and lighting