I think it’s probable. It looks like I have about about 1” from contacting anything at full lock all the way around…..I am also on stock rims. might be worth a test fit if you can work that out.
Lifted/Leveled 2021 - Postem Up
- Thread starter DWSmoot
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Check the actual dimensions of the tires you are considering. I'm clearing 315/70R17 with a fender pullback (back side only), +18ET and no lift. The tires measure 34.5x12.7, IIRC.
Man, I absolutely love the look of this. I have read all 57 pages of this thread. I have a ‘23 Yukon AT4 and what you have done here is basically exactly what I am going for. Little lift, wider tires, and a little wider stance. I have my install on Wednesday, 2.5” RC lift, 1.25” spacers. Sticking with stock wheels and tires for now strictly in the interest of not spending so much. And I have 12k miles on my stock tires (275/60/20) so figure I will just keep running them til they need to be replaced. The 305/55/20 is I think what will go with, roughly the same height tire as stock, just wider. May go 285/60/20 like you have though. It looks absolutely awesome.
I’ll post up some before and after once I get mine done.
This thread was an awesome resource to see some looks and configurations y’all have done to get ideas. I didn’t want to go huge, and wanted to keep my stock wheels and just go as big and wide as I could on those with the 2.5” lift. Almost went 3.5”, but thought that might be too big, and it’s $1k more from RC.
WIFFLEHOUSE
TYF Newbie
2024 Z71 Suburban
6.2 w/Corsa exhaust
Midnight Blue
Air ride link swap (front to back)
20x9 Fuel Trigger wheels
35x12.5 Toyo MTs
6.2 w/Corsa exhaust
Midnight Blue
Air ride link swap (front to back)
20x9 Fuel Trigger wheels
35x12.5 Toyo MTs
nick14226
Full Access Member
- Joined
- Nov 22, 2019
- Posts
- 238
- Reaction score
- 231
Looks amazing!
Rubbing hard with that setup?? I’ve trimmed quite a bit with more lift and less tire
jd08
Full Access Member
WIFFLEHOUSE
TYF Newbie
Thank you!
Definitely did my fair share of trimming, but I didn’t think it was too crazy. Lots of good info in these threads to help me out. I think I’m done with trimming, but I won’t know til wife drives it and tells me something is broken
WIFFLEHOUSE
TYF Newbie
The ride feels fine. I’d say near stock. At slow speeds (creeping through a parking lot), I feel the MT tires, but on the Highway, I was pleasantly surprised that it wasn’t too loud or rough. Lane assist works fine. I measured 2” of lift. Gained another inch with the bigger tire. 3” total
jd08
Full Access Member
Thanks, Suburban looks perfect. I wish my wife would let me do that to her Tahoe.
I have 35" tires on my Trailboss and I put one tire next to the Tahoe to see how much lift it would take to clear them and she saw it and said NO!!
I want to maybe do 1" lift for it. I already have some 20" black Trailboss Replicas and Falken AT3W tires to put on it. I am waiting until after the holidays to put them on.
ProfeZZor X
Full Access Member
Now that I have some space in the garage, I'm going to see if my spare wheel will fit, or will I need to shave off more inner bumper to make it fit. I'm currently running 33's, but I wanted to go with 35 Gladiator X-Comp M/T's, which I currently have one fitted on my spare wheel. My current stance is 6'6", which is enough to clear most parking structures, but I really like the look of the Gladiators.
Similar threads
