Lifting questions

[nicks]

im a newbie to the site and am tryin to figure out some options for yukon I have a 09 yukon and im thinking of lifting it just a little i dont think i want to go to the extent of doing a full rancho lift. i would like to try and get as much lift out of spacers possible with out having to change shocks and every thing. what is a good spacer combo to have the back sit level also. and what would i be able to fit for tires? if any one has any info and possibly pics of one done i would really appreciate it.
THANKS

 

[InTruckDesign]

Your best bet is to use the search function, this has been discussed at great length in other threads.

 

[Conor]

I think what you are looking for is the READYLIFT SST lift kit. Runs about $300 for front and rear spacers and lets you run up to a 33" tire.
http://www.readylift.com/c-194-taho...0-sst-lift-kit-2007-2010-2wd-4wd-225f15r.aspx

 

[fco_gonzo]

I know you don't what to change your stock shocks But I would recommed a rancho quicklift, not a full lift kit but a leveling kit with shock built in. Good luck!

 

[Hurlz07Tahoe]

I know you don't what to change your stock shocks But I would recommed a rancho quicklift, not a full lift kit but a leveling kit with shock built in. Good luck!

Dito...that's what I did. I like the results.

 

[fco_gonzo]

HOw does it ride, been off road with it yet?

 

[STEALTH]

i also agree with these guys

 

[turboeclips]

With the CCM leveling kit you should be able to run 33s with some minor trimming. Fraction of the cost of that Readylift. It is a very popular solution.

http://www.ccmoffroad.com/shop/index.php?l=product_detail&p=38

 

[Zed 71]

+1 for CCM. FYI most of these level kits indicate you can fit 33/11.5 tires, but I just put on 285/65/18 (32.5"/11.2" actual measurements) and I still had to trim. Not sure how some are mounting this size tire on stock rims without any trimming.

 

[turboeclips]

+1 for CCM. FYI most of these level kits indicate you can fit 33/11.5 tires, but I just put on 285/65/18 (32.5"/11.2" actual measurements) and I still had to trim. Not sure how some are mounting this size tire on stock rims without any trimming.

Did it rub all the time or just when doing like u-turns or sharp turns? I was wanting to put 33" Mud Grapplers, but those are supposed to be 33/12.5. Maybe I will just have to hold off until I can get a full lift.