Lightbar suggestions

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Fast_AT4

RWM +1
Supporting Member
Joined
Mar 26, 2022
Posts
1,117
Reaction score
1,620
Location
SW Florida
Wanting to add a similar to what I had on my F250 on the AT4...anyone done a lightbar yet?

PFAIMG_20191027_142538_323.jpg
 
OP
OP
Fast_AT4

Fast_AT4

RWM +1
Supporting Member
Joined
Mar 26, 2022
Posts
1,117
Reaction score
1,620
Location
SW Florida
Looks like a 36" curved might be proper. Need to find a proper mounting point and not block too mcu hair.
 

TrueAt1stLight

Full Access Member
Joined
Oct 31, 2020
Posts
353
Reaction score
375
Location
Minneapolis
I’m really curious what you come up with as there’s NOTHING to my knowledge available after-market for our vehicles, for light bars.

I’ll tell you- they make a world of difference as I have a set of high intensity Rigid Industries mounted on the bow of my pontoon which I run on the Miss. river in extreme SE MN. The “pool” (beteeen the locks and dams) is very large (something like 16 miles long and opening into lakes in some areas) and pitch black at night. There’s hardly any civilization aside from houses along the shore. Those lights will literally shine to the freakin’ river’s end when you flip them on. I can’t even imagine how they’d perform on the road!
 

Pertzbro

Full Access Member
Joined
Nov 15, 2021
Posts
112
Reaction score
47
I have a cheapo $100 ebay 52in curved on on my polaris ranger. It's insane how good even the cheap ones work. must be very rural for use...
 
OP
OP
Fast_AT4

Fast_AT4

RWM +1
Supporting Member
Joined
Mar 26, 2022
Posts
1,117
Reaction score
1,620
Location
SW Florida
How "bad" would it be to place it in the lowest grill area? Would need to make certain not to get near the auto air fins (for lack of better words)...wouldnt imagine it would "block" that much air.
 
OP
OP
Fast_AT4

Fast_AT4

RWM +1
Supporting Member
Joined
Mar 26, 2022
Posts
1,117
Reaction score
1,620
Location
SW Florida
I have a cheapo $100 ebay 52in curved on on my polaris ranger. It's insane how good even the cheap ones work. must be very rural for use...
Had one one my old F250 Super Duty and paid like $600 for it..it was PERFECT. Should of take it off when I sold it.
 

ProfeZZor X

Full Access Member
Joined
Jan 19, 2022
Posts
511
Reaction score
425
Location
High Country
You might want to check the laws in your state and county for any illegal bolt-on lights. I know here in California, a law enforcement officer can cite you for each individual LED light inside the lightbar housing - which can be a hundred or more lights. So theoretically (if the officer is an ******* at the time of your traffic stop), you could be fined thousands of dollars for just one lightbar.
 

Forum statistics

Threads
132,697
Posts
1,872,714
Members
97,507
Latest member
eric83
Top