Nearly 4 years later, my 2001 Team DC Audio build

[Onebad1983]

Dynomax came in today. Along with a new push button switch and the blue tint for my odometer. Haven’t had a chance to pull out the cluster to put the tint on yet.

cut out the flowmaster 40 and clamped in the dynomax. Wanted to make sure I liked it and want to be able to easily take it off when I order new piping. When p/o put on the flowmaster they welded on a like foot long section of 3” on the output and gap welded the 3” to the factory 2.75” tail pipe. So I’m definitely going to be replacing it here soon.

it’s more throaty than the flowmaster and less cackly in the high rpm range. I’d say it’s louder driving, less drone, but it’s quieter idling it seems. So far I’m enjoying it. View attachment 243946 View attachment 243947 View attachment 243948 View attachment 243950 View attachment 243949

I need to meet up with you some day and we're going to replace ALL of the lights in my interior lol. Also where did you get that push button switch from and how hard was it to install? I need it!

 

[05Single]

Nice . Insert Link for button

 

[Thatsquishykid717]

Do you have an Instagram?

thatsquishykid717

I need to meet up with you some day and we're going to replace ALL of the lights in my interior lol. Also where did you get that push button switch from and how hard was it to install? I need it!

If you were close by I’d definitely help you out! And they are super easy to install. You can wire it a couple different ways I wired mine so the light would only come on when the button was pressed. I got it off Amazon here is the link.

https://www.amazon.com/Latching-But...+led+switch&qid=1586071380&sr=8-16&th=1&psc=1

Nice . Insert Link for button

^^^^

 

[05Single]

thatsquishykid717



If you were close by I’d definitely help you out! And they are super easy to install. You can wire it a couple different ways I wired mine so the light would only come on when the button was pressed. I got it off Amazon here is the link.

https://www.amazon.com/Latching-Button-Switches-Waterproof-Black/dp/B076GXZDY5/ref=mp_s_a_1_16?dchild=1&keywords=push+button+green+led+switch&qid=1586071380&sr=8-16&th=1&psc=1



^^^^

vvvv

 

[Tonyrodz]

Nice. Can't wait to see what that tint will look like. Possible to get a sound clip up of the Dynomax? I had them years ago on my Supercharged Tbird and didn't like them. They sounded too "tinny" for my liking. I'm thinking of replacing my MBRP, so I'm looking for something a little more throaty with less drone. Having long tubes with no cats doesn't help either lol.

 

[Thatsquishykid717]

Nice. Can't wait to see what that tint will look like. Possible to get a sound clip up of the Dynomax? I had them years ago on my Supercharged Tbird and didn't like them. They sounded too "tinny" for my liking. I'm thinking of replacing my MBRP, so I'm looking for something a little more throaty with less drone. Having long tubes with no cats doesn't help either lol.

can videos upload on here or do I need to upload it on YouTube and attach it in here never tried it before. I it sounds deep compared to my flowmaster. I feel like my flowmaster sounded tinny. But I agree longtubes and no headers don’t help with that lol.

 

[Tonyrodz]

can videos upload on here or do I need to upload it on YouTube and attach it in here never tried it before. I it sounds deep compared to my flowmaster. I feel like my flowmaster sounded tinny. But I agree longtubes and no headers don’t help with that lol.

Gotta upload to youtube 1st, then attach the link using the little film icon.

 

[Thatsquishykid717]

Gotta upload to youtube 1st, then attach the link using the little film icon.

Okay sounds good I’ll try to get a couple videos today.

 

[Tonyrodz]

Okay sounds good I’ll try to get a couple videos today.

Cool.

 

[Thatsquishykid717]

Alright here is a video I put together. So far I like the dynomax better. It’s less restrictive and sounds better throughout the rpms. I took the video the same way I did back when I first got the longtubes installed with the 40s as you’ll see. Once I get the full 3” exhaust done I’ll put another video on