New Centre Console for my 2011 ppv

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

iLikeEggs

Potato!
Joined
Sep 4, 2015
Posts
804
Reaction score
282
Location
Oregon, USA
The Ppv/ssv units are not wired for a center console. In mine I just powered up the 12 volt outlets using a fused battery feed
There is a pig tail that is left there at the factory. It is for the power to the center console. You have to fish it out from underneath the flooring, which is easy. It's located around where the roll over sensor is on the floor board, directly underneath the center console. Just fish around, you'll find it.

IMG_20150925_162322.jpg
 

GranPrix

Full Access Member
Joined
Sep 10, 2017
Posts
701
Reaction score
473

Ron C

Full Access Member
Joined
Nov 4, 2017
Posts
727
Reaction score
173
Location
Los Alamos, NM
So will this harness let us PPV/SSV owners add the Bose subwoofer?


Well I am actually looking into it. I did get a Nav-Radio, it's being re-programmed. I needed a wiring harness to install it (I needed: #6603 on http://www.oemradios.com/parts.php)
That part/harness has the connectors that would let you plug in the harness that is in the center console. (it claims). The harness in my center console was cut, but it has the/an amplifier underneath it (that I kept) and the rear audio controls.

Once I have the radio working, I probably will buy the harness that goes into the center console, and try and see if I can get it to work. I am pretty sure it won't work with the basic radio, it might work with the nav-radio I have (it has a bunch more connectors in the back.

The harness I mentioned above, I think, is the one in the center console, but I'd have to further look into it to make sure.

Ron
 

iLikeEggs

Potato!
Joined
Sep 4, 2015
Posts
804
Reaction score
282
Location
Oregon, USA
So will this harness let us PPV/SSV owners add the Bose subwoofer?
Unfortunately, no. It's only for the center console. Depending how the vehicle was configured when it left the factory there may be another pig tail somewhere down there.
 

CrashTestDummy

Full Access Member
Joined
Feb 18, 2014
Posts
897
Reaction score
338
Location
Pearland, Texas
There is a pig tail that is left there at the factory. It is for the power to the center console. You have to fish it out from underneath the flooring, which is easy. It's located around where the roll over sensor is on the floor board, directly underneath the center console. Just fish around, you'll find it.

View attachment 190172
I noodled around for that harness TWICE and came up empty-handed. I'm guessing it was rolled up with the upfitter's harness when they retired the truck, so it's a batch of cut wires up behind the radio now.
 

GranPrix

Full Access Member
Joined
Sep 10, 2017
Posts
701
Reaction score
473
When my center console comes in next week I’ll try to look for the wire. What color is it supposed to be?
 

Forum statistics

Threads
132,767
Posts
1,873,938
Members
97,605
Latest member
audley71
Top