We just picked up a super clean 2007 Yukon XL. Purchased from my sister after an accident. Had to replace front bumper, fenders and hood and of course support but all put together now. Been following this group for a couple of weeks to get familiar with the chassis but will likely have questions. So far it's been super easy to work on which is great. Looks a little funny as it now has a hybrid front bumper on it but maybe that will help with fuel economy we'll see.
New GMC owner - 2007 Yukon
- Thread starter Zarati
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Welcome to the forum from Idaho! The work on the Yukon looks good!
- Joined
- Dec 8, 2016
- Posts
- 3,854
- Reaction score
- 4,821
Welcome from Miami&Queens NY!
Nice work on the Yukon!
Nice work on the Yukon!
Welcome to this great forum.
Thanks. I'm just a little West of you. Newman lake WA!
Nice! You are very close! We are in Coeur D'Alene.
Joseph Garcia
Supporting Member
- Joined
- Aug 2, 2018
- Posts
- 7,346
- Reaction score
- 9,930
Welcome to the Forum from NH.
Lots of knowledgeable folks here who freely share their knowledge, experiences, and perspectives. Knowledge is power.
I hope that you will become a participating member in the Forum's discussions.
More pics of the truck, please.
Lots of knowledgeable folks here who freely share their knowledge, experiences, and perspectives. Knowledge is power.
I hope that you will become a participating member in the Forum's discussions.
More pics of the truck, please.
Greaser007
TYF Newbie
- Joined
- May 19, 2022
- Posts
- 6
- Reaction score
- 12
@Zarati
Nice score guy.
I stumbled across an '07 Chevy Suburban 2500 4x4 at our local dealer in early 2017. It has the 6.0L with 3:73 axle ratios.
One thing: Do engage your 4x4 BEFORE you need it.
Ours is very quirky and seems to take some back and forth twisting of the dash button while stationary to finally get the 4x4 dash light to go steady, and not flash.
Usually, I hear a Clunk when the axle lock kicks in.
We put on Goodyear M&S mud tires on it early 2024, and they do work well in the snow, and seem to be wearing even. We bought them at Walmart. hahaha
I run BFG mud terrains on my Jeep and Ford F350.
One more thing:
If you have the electric rear hatch lift, ours failed a few years back. The hatch wouldn't lift.
Yes, our local Chev dealer wanted $1,800 for the Fix.
These forums here is where I learned my Fix, after taking everything apart including the lift motor clutch solenoid to check it.
Wound up being the Latch on the hatch.
The latch is a mechanical wizard of small plastic gears and limiting switches. I took it apart to see how it works. Simply amazing and complicated.
I purchase the "AC Delco" latch on RockAuto, put it in, and put everything back together, and it hasn't miss a lick since. No, I didn't get the Latch "programmed."
Total Latch repair cost was I think $330 for the ACDelco unit.
The fella who posted his misery and Fix was here on these forums. So, I joined to share my joy.
Best of wishes, and Happy Holidayz
Len
Nice score guy.
I stumbled across an '07 Chevy Suburban 2500 4x4 at our local dealer in early 2017. It has the 6.0L with 3:73 axle ratios.
One thing: Do engage your 4x4 BEFORE you need it.
Ours is very quirky and seems to take some back and forth twisting of the dash button while stationary to finally get the 4x4 dash light to go steady, and not flash.
Usually, I hear a Clunk when the axle lock kicks in.
We put on Goodyear M&S mud tires on it early 2024, and they do work well in the snow, and seem to be wearing even. We bought them at Walmart. hahaha
I run BFG mud terrains on my Jeep and Ford F350.
One more thing:
If you have the electric rear hatch lift, ours failed a few years back. The hatch wouldn't lift.
Yes, our local Chev dealer wanted $1,800 for the Fix.
These forums here is where I learned my Fix, after taking everything apart including the lift motor clutch solenoid to check it.
Wound up being the Latch on the hatch.
The latch is a mechanical wizard of small plastic gears and limiting switches. I took it apart to see how it works. Simply amazing and complicated.
I purchase the "AC Delco" latch on RockAuto, put it in, and put everything back together, and it hasn't miss a lick since. No, I didn't get the Latch "programmed."
Total Latch repair cost was I think $330 for the ACDelco unit.
The fella who posted his misery and Fix was here on these forums. So, I joined to share my joy.
Best of wishes, and Happy Holidayz
Len
Hoesgottaeat2
Full Access Member
Welcome from NY!
Similar threads
