New guy here needs some help..

[Cougar1Car]

I just picked up a 96 Yukon from a friend and found that the driver side rear window motor does not work.. I found this out after rolling the window down. I can not figure out how to get the window motor out.. Every other one I have changed has had bolts and 2 minutes later replaced..

Heres the truck if anyone is interested.

 

[SunlitComet]

I would go for the switch first if it allows you to go down but not up. or does it just make motor noise or something.

 

[Freedom Motorsports]

Welcome to the neighborhood!

I agree, I would condemn the switch before the motor, but I am not sure exactly how that motor would come out, I have personally never had to replace one.

 

[Cougar1Car]

It is not going either way anymore... Motor is not making any noise. All the other windows work just the one doesn't. I rolled it down this morning went to roll it back up and nothing..

---------- Post added at 09:13 PM ---------- Previous post was at 09:12 PM ----------

P.S thanks for the welcomes....

 

[Freedom Motorsports]

I would definitely replace the switch first. If you have a volt meter, you can at least check the switch to see if it is working or not.

 

[SunlitComet]

the switch may just be over used...........

Wait rear left window?


Which switch is not working the one on the door itself or the master assembly up on the driver door? Is the master lock out activated? I have tech data for these trucks so any service info like diagrams and stuff you need I can get it to you.

Here is an example of the data. Just keep in mine the pictures part change after a few hours where the text would stay the same(faster posting here that way). so if you need them again let me know or tell me if you need larger permanents one. it just takes longer.


4 Door
Windows

Notes

Power Windows (Part 1 Of 2)

Notes

Power Windows (Part 2 Of 2)

 

[Cougar1Car]

Neither switch is working the driver door switch and the rear door switch either. I will have to look over what you posted later my phone doesn't make it easy.

 

[SunlitComet]

I refreshed the images for you if they have changed when you get to them again let me know.

 

[gpracer1]

When you push up or down on that window switch, does the voltage gauge move at all?

If it moves and the window doesnt, then the motor is stuck or bad. If the voltage stays the same, then the switch, door jam wiring, or motor is bad.

Try that with the engine off key on, so you can see the gauge.

 

[Cougar1Car]

I don't have a gauge to check.. I'm pretty sure it's the motor. He must of had the window down some. The whole track is all rust.



Are the two rivets in the picture below holding the motor in??


What are the chances of both switches going bad at once??