New yukon Denali 2013

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

The biker

TYF Newbie
Joined
Sep 9, 2013
Posts
3
Reaction score
0
Hi every body

This is my first thread in this forum. I got new 0 meter GMC Denali 2013 yesterday while I was driving i felt fluctuation in the RPM. It was going slightly up than slightly down ward so I tried going on 60 MPH with cruise control on but it did the same thing. And the other issue is the acceleration from 2nd shift to 3rd feels poor I called serves centre and informed them about the issues. They said the RPM fluctuation is normal with all Yukon Denali and regarding the shift issue needs new software to be downloaded. So I am wondering is any of you guys have the fluctuating RPM and is it normal on Yukon Denali.
 

doubletapdrew

Full Access Member
Joined
May 26, 2010
Posts
299
Reaction score
2
Haven't heard of that before but you can take it to any GM dealer and they should be able to flash the ECU with the newest updates under warranty.
 

GM Customer Service

Full Access Member
Joined
Aug 11, 2010
Posts
1,099
Reaction score
31
Location
Michigan
Hi every body

This is my first thread in this forum. I got new 0 meter GMC Denali 2013 yesterday while I was driving i felt fluctuation in the RPM. It was going slightly up than slightly down ward so I tried going on 60 MPH with cruise control on but it did the same thing. And the other issue is the acceleration from 2nd shift to 3rd feels poor I called serves centre and informed them about the issues. They said the RPM fluctuation is normal with all Yukon Denali and regarding the shift issue needs new software to be downloaded. So I am wondering is any of you guys have the fluctuating RPM and is it normal on Yukon Denali.

Hello and welcome to the forum! I understand that you may have some concerns about your new Yukon Denali. I would like to look into these concerns for you. Please private message if I can be of any assistance.

Best regards,

Jennifer T.
GM Customer Care
 
OP
OP
T

The biker

TYF Newbie
Joined
Sep 9, 2013
Posts
3
Reaction score
0
please click at the you tube link to watch the video. the cruise control is on and the road is straight flat and see the rpm needle jumps from 1300 to 1500. The GM dealer guy said its normal in all 2013 Denali s

http://youtu.be/lK-qpf7Ox3k

---------- Post added at 11:28 AM ---------- Previous post was at 11:09 AM ----------

please click on the you tube link to watch the video of RPM fluctuation. I talked to GMC dealer guy and he tested the car and said the fluctuation in the rpm is normal all yukon Denali 2013 has the same fluctuation .

http://www.youtube.com/watch?v=lK-qpf7Ox3k&feature=youtu.be
 
Last edited:

livingez_123

Full Access Member
Joined
Feb 18, 2013
Posts
1,798
Reaction score
112
Location
Sandy, OR
That is quite the noticeable surge, can you feel it? is your ac on when it's doing it?
When I set the cruise on my Denali when towing it never does anything like that. But, when my ac cycles off and on, I can feel and see it in the tach when I'm on cruise.
 

08grey

Full Access Member
Joined
Jun 17, 2012
Posts
4,596
Reaction score
725
^^^ what he said. Try it without the ac..... and see if you can feel it.

I just did 1400 miles on cruise control and did not notice anything like that.
 

ChickenForker

TYF Newbie
Joined
Aug 20, 2012
Posts
11
Reaction score
1
Location
Mesa, Az
Have a 2013 as well and have never noticed what youre seeing....Went from the dealers lot to a 1500 mile road trip. I didnt notice any of that!
 

Forum statistics

Threads
132,394
Posts
1,867,359
Members
97,043
Latest member
zachdacoo

Latest posts

Top