So at comfortable ride height it's still super raked?
You could set the back down to even out but I would recommend getting brackets norcal sells for the shocks. I think I had my front and back set a little lower then the 2".
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
So at comfortable ride height it's still super raked?
You could set the back down to even out but I would recommend getting brackets norcal sells for the shocks. I think I had my front and back set a little lower then the 2".
I was really considering just doing the REAR in airbags and the front on drop struts.
so 2 bags in the back and the brackets, one tank and compressor
In order to run the back bags with any type of controls like how this works you would still need a tank and a place to put the compressor/s and one of the different options to run just a 2 corner system.So to those that know........
It seems this kit would only control all four corners...... Since I would like to do only the back what options is there to control it?
I honestly have no idea how much PSI is in there it would be something you would have to play with to find out but you could T the bags together which I would recommend or you could fill each bag manually.When the back is at ride height, which is 2 inches lower than stock........ what should the PSI be in the bags?
They shouldn't lose any but the possibility is always there.Also, If I did manual fill, how much air do the bags lose every day, just sitting?
HOLY Shit did that full kit only sell for 1400?? If so I would have bought it for that much!!!