NNBS Kelderman air suspension kit

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Status
Not open for further replies.

yates ™

Resident Apple hater
Supporting Member
Joined
Jul 9, 2010
Posts
24,409
Reaction score
6,421
Location
Iowa
So at comfortable ride height it's still super raked?

You could set the back down to even out but I would recommend getting brackets norcal sells for the shocks. I think I had my front and back set a little lower then the 2".
 
OP
OP
iwaslowr

iwaslowr

ɹǝqɯǝɯ ɹoıuǝs
Joined
May 4, 2009
Posts
1,640
Reaction score
33
Location
Austin, Tx.
You could set the back down to even out but I would recommend getting brackets norcal sells for the shocks. I think I had my front and back set a little lower then the 2".

I just so happen to have the DJM rear shock/sway bar relocator kit as well... If the buyer wants those parts in addition to the Kelderman air suspension I'm sure we can work out a deal.
 
Last edited:
OP
OP
iwaslowr

iwaslowr

ɹǝqɯǝɯ ɹoıuǝs
Joined
May 4, 2009
Posts
1,640
Reaction score
33
Location
Austin, Tx.
I was really considering just doing the REAR in airbags and the front on drop struts.

so 2 bags in the back and the brackets, one tank and compressor

To help me re-coop as much as possible from my investment I have to keep the tanks as a pair and same goes for the pair of compressors. Shoot me a PM with offer if you'd like the rear bags with associated brackets.
 

NathanJax

Vacation Nathan
Staff member
Administrator
Supporting Member
Joined
May 9, 2009
Posts
49,135
Reaction score
943,577,172
Location
Jax, Fl
bidding on all 3!!!
 

Goodinblack

I Like Tacos
Supporting Member
Joined
Oct 27, 2011
Posts
22,295
Reaction score
3,043
Location
Dirty South
So to those that know........

It seems this kit would only control all four corners...... Since I would like to do only the back what options is there to control it?

When the back is at ride height, which is 2 inches lower than stock........ what should the PSI be in the bags?

Also, If I did manual fill, how much air do the bags lose every day, just sitting?
 

yates ™

Resident Apple hater
Supporting Member
Joined
Jul 9, 2010
Posts
24,409
Reaction score
6,421
Location
Iowa
So to those that know........

It seems this kit would only control all four corners...... Since I would like to do only the back what options is there to control it?
In order to run the back bags with any type of controls like how this works you would still need a tank and a place to put the compressor/s and one of the different options to run just a 2 corner system.
When the back is at ride height, which is 2 inches lower than stock........ what should the PSI be in the bags?
I honestly have no idea how much PSI is in there it would be something you would have to play with to find out but you could T the bags together which I would recommend or you could fill each bag manually.
Also, If I did manual fill, how much air do the bags lose every day, just sitting?
They shouldn't lose any but the possibility is always there.
 

GalaxyBlackEsky

BlackedoutLT3
Joined
May 13, 2009
Posts
2,524
Reaction score
12
Location
MD
HOLY Shit did that full kit only sell for 1400?? If so I would have bought it for that much!!!
 
Status
Not open for further replies.
Top