no rear air on 2002 denali

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
W

WDE

TYF Newbie
Joined
Jun 11, 2013
Posts
28
Reaction score
0
No air flow at all in the rear , like said just quit and front works fine

---------- Post added at 06:09 PM ---------- Previous post was at 06:04 PM ----------

Front works fine and rear has no air flow at all none
 

Vette66

Full Access Member
Joined
Jul 11, 2013
Posts
196
Reaction score
9
Location
Fresno, Ca
Check the front fuse panel (under the hood) there is a rear hvac fuse that should be the one that would go out if it's a fuse. Not sure why we are blaming actuators or vacuum problems yet when he has not checked the fuse or the controls.

This forums pictures suck when loading them though tapatalk

ImageUploadedByTapatalk1374794197.019155.jpg
 

Attachments

  • ImageUploadedByTapatalk1374794072.247660.jpg
    ImageUploadedByTapatalk1374794072.247660.jpg
    31.2 KB · Views: 3
  • ImageUploadedByTapatalk1374794142.652979.jpg
    ImageUploadedByTapatalk1374794142.652979.jpg
    29.9 KB · Views: 4
Last edited:

zieglerj-pdm-specialist

Full Access Member
Joined
Mar 8, 2013
Posts
376
Reaction score
0
Location
in 100 degree sandbox
Hey

Check the front fuse panel (under the hood) there is a rear hvac fuse that should be the one that would go out if it's a fuse. Not sure why we are blaming actuators or vacuum problems yet when he has not checked the fuse or the controls.

This forums pictures suck when loading them though tapatalk

View attachment 23181

Because if a fuse blown something else would have went out on the guy. If it turns out to be electrical he is in the ***** because what would have blown it. Rarely does this come with one problem others will follow and if he gets ac in the front the back it is ran off of vacuum in 2002 so its either vacuum hose is disconnected or the actuator is not opening to allow the air flow back to the Rear. School is good for people. Make people educated
 
OP
OP
W

WDE

TYF Newbie
Joined
Jun 11, 2013
Posts
28
Reaction score
0
So how would I go about checking this to see if this is the problem?

---------- Post added at 12:16 PM ---------- Previous post was at 12:14 PM ----------

Also all fuses are fine. Already checked those where is the vaccum located
 

Vette66

Full Access Member
Joined
Jul 11, 2013
Posts
196
Reaction score
9
Location
Fresno, Ca
Other than checking fuses I have no answers. I take things apart until I understand them and figure out the problem. So I have no answers for you. zieglerj-pdm-specialist seems to have some answers maybe he will help out.
 

zieglerj-pdm-specialist

Full Access Member
Joined
Mar 8, 2013
Posts
376
Reaction score
0
Location
in 100 degree sandbox
I agree with Vette Check for fuses

Other than checking fuses I have no answers. I take things apart until I understand them and figure out the problem. So I have no answers for you. zieglerj-pdm-specialist seems to have some answers maybe he will help out.

Check for fuses just to make 100% nothing is blown. And if there is nothing wrong electrically I would look for two fans one fan for the front the other for the rear if it has one. Just following up on Vette's recommendations. Actually there has to be two fans because if you have it on high in the back its not on high in the back. Vettes right look for fuse and then the second blower fan for the rear. The have to be close because they both would run off the same condenser and heater. Which means it would have two different solenoid actuators to mix the air correctly. Follow it back to the fan if the fuse is not blown and the fan is usually on the firewall or behind the cubby hole. Keep me posted on what you find and Ill do my best to help you out from there. Good luck and don't hesitate to write with any questions. Take Care man.
 
OP
OP
W

WDE

TYF Newbie
Joined
Jun 11, 2013
Posts
28
Reaction score
0
Now could it be a resistor In The second blower and cause it not to work?
 

Forum statistics

Threads
132,036
Posts
1,861,357
Members
96,484
Latest member
DatHoeNherTahoe
Top