BADRIDES
Full Access Member
- Joined
- Dec 18, 2015
- Posts
- 1,734
- Reaction score
- 1,147
http://www.belltech.com/products/belltech/shocks/belltech-street-performance-2410ff.html
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
http://www.belltech.com/products/belltech/shocks/belltech-street-performance-2410ff.html
4 of the pics don't workModel/Year/2x/4x/AWD:
- 2003 GMC Yukon Denali
Advertised drop:
- 3"/4"
Front:
2" Maxtrac Drop Spindles
Keys (Not installed)
Rear:
4" Maxtrac Drop Springs
NorcalSS End Links
Wheels & Tires:
- Wheels : 22" Boss 330 wheels
- Tires 305/40R22
Sits 33" From ground to Fender above tire.
Will most likely have to redo the tailpipes, shoudn't be too hard lol
Better pictures once i get it out and let everything settle. I cut the factory bumpstops for now. Will do the free travel mod this weekend after work.
The pics that showed up were the ones that wouldnt work, i just redid the links. When i went to edit the post i couldnt delete the failed attempts. There was one picture i didnt post.4 of the pics don't work
The pics that showed up were the ones that wouldnt work, i just redid the links. When i went to edit the post i couldnt delete the failed attempts. There was one picture i didnt post.
Very clean looking!Finally Done with the Drop.
Model/Year/2x/4x/AWD:
- 2003 GMC Yukon Denali
Advertised drop:
- 3"/4"
Front:
2" Maxtrac Drop Spindles
1-3" Mcaughys keys
Rear:
4" Maxtrac Drop Springs (1 and a half coils cut)
NorcalSS End Links
Poly Bushings for Panhard bar and Upper and lower control arms
Free Travel Mod
Wheels & Tires:
- Wheels : 22" Boss 330 wheels
- Tires 285/45R22
Sits 32" From ground to Fender above tire front and rear.
Before the lowering kit, roll pan, and wheels
After
All thats left is to just add the Spohn Panhard, uppers and lowers. I can finally close this chapter and start working on getting the rollpan and front bumper painted.
Looks damn good. Like the rims.Finally Done with the Drop.
Model/Year/2x/4x/AWD:
- 2003 GMC Yukon Denali
Advertised drop:
- 3"/4"
Front:
2" Maxtrac Drop Spindles
1-3" Mcaughys keys
Rear:
4" Maxtrac Drop Springs (1 and a half coils cut)
NorcalSS End Links
Poly Bushings for Panhard bar and Upper and lower control arms
Free Travel Mod
Wheels & Tires:
- Wheels : 22" Boss 330 wheels
- Tires 285/45R22
Sits 32" From ground to Fender above tire front and rear.
Before the lowering kit, roll pan, and wheels
After
All thats left is to just add the Spohn Panhard, uppers and lowers. I can finally close this chapter and start working on getting the rollpan and front bumper painted.