Oil in the Intake Plenum

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

lamerem

Full Access Member
Joined
Jul 6, 2015
Posts
94
Reaction score
24
2011 Tahoe LT 4WD Engine Code 0, Flex Fuel 5.3l.....

Did the oil change last night (Mobil 1 Extended Performance) and removed the air cleaner hose to look at the throttle body. Opened to butterfly and reveiled that there is a coating of oil in the plenum. Infact in one of the lower divets of the plunom there is actually a small pool the size of a dime. A note to add is that I changed the oil 4,000 miles ago and filled it with 6 quarts; I drained out 5 quarts last night so it was a quart low.

The car runs good, has the minimal normal idle variance. The engina has 81,500 miles on it. The powertrain warrnaty ended in the begining of Feb 2016. I do have an extended warranty but obviously I would prefer GM to cover the cost or atleast the deductible. But, if not oh well, more or less just trying to figure out the issue.
 

PaulS63

Member
Joined
Nov 20, 2015
Posts
48
Reaction score
5
Happens because of a combination of poor PCV design and the AFM function. Shutting off AFM cured mine, but I also installed a catch can to prevent this.
 
OP
OP
lamerem

lamerem

Full Access Member
Joined
Jul 6, 2015
Posts
94
Reaction score
24
What catch can did you install? What is the process for installing it, any modifications needed for it?
 
OP
OP
lamerem

lamerem

Full Access Member
Joined
Jul 6, 2015
Posts
94
Reaction score
24
Bought one of CHEVYNC, it was from catchcans.com
 

Forum statistics

Threads
132,054
Posts
1,861,649
Members
96,510
Latest member
mello1420
Top