Oil pressure sensor HELP!!!!

[Spencer4991]

Does this look to have a filter in it??? I have fished a hook in but can’t seem to grab anything and the new filter(not putting it in) doesn’t fit all the way down…. 2010 Chevy suburban

 

[Spencer4991]

Thanks for all the input!!!

 

[j91z28d1]

were you able to get one out? I can't tell in that pic at all

 

[Fless]

I can't tell if there's a screen in there or not. Some people take a long deck screw or the like and stick it down there, turn it clockwise by hand and pull them out. YMMV

 

[petethepug]

 

[Spencer4991]

I wasn’t able to get anything out….ill try a deck screw tomorrow, I’m dropping the pan anyways to change out the pick up tube gasket. I’m trying to cross everything off before replacing the pump.

 

[Fless]

Looks like a larger screw might work better. 5/16" lag maybe...

 

[Joseph Garcia]

Welcome to the Forum from NH.

Lots of knowledgeable folks here who freely share their knowledge, experiences, and perspectives. Knowledge is power.

I hope that you will become a participating member in the Forum's discussions.

Pics of the truck, please.

You are already receiving sage advice from the knowledgeable folks on this Forum.

Not all of these motors had filter screens. @Doubeleive may be able to clarify which ones did not have a filter screen.