P2671 Actuator Supply Voltage B Circuit High

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

redncrash

TYF Newbie
Joined
Mar 11, 2025
Posts
3
Reaction score
0
Hello,
My 2005 GMC Yukon XL 1500 Autoride 4x4 5.3, is intermittently pulling OBD2 scanner code p2671. It pulls this code twice. The only symptom is right before code illuminates, when driving between 40-50 mph is the transmission jumping between 3 and 4 gear. This SUV runs great! Transmission shifts smoothly at all other speeds. I have researched for several days with only very confusing information. Can anyone help?
 

Joseph Garcia

Supporting Member
Joined
Aug 2, 2018
Posts
7,916
Reaction score
10,939
Welcome to the Forum from NH.

Lots of knowledgeable folks here who freely share their knowledge, experiences, and perspectives. Knowledge is power.

I hope that you will become a participating member in the Forum's discussions.

Pics of the truck, please.

I cannot personally assist you with your issue, but other members of this Forum much more knowledgeable than me in this area will chime in.

@NickTransmissions is our resident transmission expert, and he may be able to provide some troubleshooting tips.
 
OP
OP
redncrash

redncrash

TYF Newbie
Joined
Mar 11, 2025
Posts
3
Reaction score
0
Welcome to the Forum from NH.

Lots of knowledgeable folks here who freely share their knowledge, experiences, and perspectives. Knowledge is power.

I hope that you will become a participating member in the Forum's discussions.

Pics of the truck, please.

I cannot personally assist you with your issue, but other members of this Forum much more knowledgeable than me in this area will chime in.

@NickTransmissions is our resident transmission expert, and he may be able to provide some troubleshooting tips.
Thank you, I pray someone can help with this code. I did put a photo of my truck up.
 

rockola1971

Full Access Member
Joined
Dec 29, 2016
Posts
2,709
Reaction score
3,719
Location
Indiana (formerly IL)
You have a broken wire between your TCM and solenoid(s) within your transmission. The broken wire can either be internal to the tranny OR on the chassis mounted wiring harness.
 

Forum statistics

Threads
133,998
Posts
1,894,800
Members
99,431
Latest member
ETWE
Top