Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Welcome to the forum from Virginia. @swathdiver may know.
swathdiver
Full Access Member
Don't know off-hand but will take a look next time I take the truck out.
mikez71
Full Access Member
- Joined
- Mar 9, 2023
- Posts
- 1,367
- Reaction score
- 1,597
In my hptuners vcm scanner config file, it shows 12887 for DOD requested.
No idea if that is the same info you are looking for or not..
No idea if that is the same info you are looking for or not..
wait... you can find the pids in the hpt configure file from their scanner?
I must learn your secrets lol
mikez71
Full Access Member
- Joined
- Mar 9, 2023
- Posts
- 1,367
- Reaction score
- 1,597
Not sure if they are the right numbers, but I opened "vcm scanner.cfg" with notepad..
swathdiver
Full Access Member
I did not see anything tonight. If I were wanting a workaround, I would set up Torque Pro to monitor the injector pulses. You can do an individual gauge for all eight cylinders or just the 4 AFM cylinders or just one of the AFM cylinders or one of each. Lots of ways to configure it.
