Please help, Going crazy

[mmbow702]

Redoing brakes and rotors on my 02' Tahoe LS. My caliper WONT fit over the new rotor and brake pads. Dual piston caliper, and got the supposed right parts for the job. What am I missing here?

 

[PPV_2018]

Did you compress the piston enough? The new pads are probably noticeably thicker than the worn out pads and the piston is probably sticking out too far from the old pads

 

[mmbow702]

Yes, pistons were compressed fully.

 

[Fless]

What parts (brand, part #) are you using for this brake job?

 

[mmbow702]

First I tried some cheap Amazon bs, but once that failed I went with Autozone 55067DL for the rotor and MKD792 pads.

 

[mmbow702]

First I tried some cheap Amazon bs, but once that failed I went with Autozone 55067DL for the rotor and MKD792 pads

First I tried some cheap Amazon bs, but once that failed I went with Autozone 55067DL for the rotor and MKD792 pads.

I lied, brake pads were MKD834