Black Market
Member
- Joined
- Jul 18, 2012
- Posts
- 45
- Reaction score
- 0
So my 2007 SSV has developed a popping/clunking sound when making right turns...it is somewhat intermittent but is more pronounced on harder turns.
Any ideas on what I am up against here?
---------- Post added at 10:28 AM ---------- Previous post was at 09:17 AM ----------
So reviewing previous posts it looks like there are a number of potential culprits:
- Slip yoke may need greasing
- Alignment cam bolts may need to be tightened
- Wheel bearing may be shot
- Bad tie rod/ball joint
- Busted motor mount
- Busted sway bar link bracket
These seem to be common issues with the NBS...
Any ideas on what I am up against here?
---------- Post added at 10:28 AM ---------- Previous post was at 09:17 AM ----------
So reviewing previous posts it looks like there are a number of potential culprits:
- Slip yoke may need greasing
- Alignment cam bolts may need to be tightened
- Wheel bearing may be shot
- Bad tie rod/ball joint
- Busted motor mount
- Busted sway bar link bracket
These seem to be common issues with the NBS...