Post your lifts.

[gat0r]

Harpsubb92, what kind of canopy is that?

looks like a rhino rack

 

[harpsubb92]

looks like a rhino rack

Sent from my iPhone using Tapatalk

 

[harpsubb92]

It's an Eezi Awn K9 rack and Eezi Awn Manta 270 awning.


Sent from my iPhone using Tapatalk

 

[TM98]

Thanks!

 

[Hunters05hoe]

View attachment 58874 View attachment 58873 View attachment 58872 2006 Yukon slt 2wd
5100 Bilstein all around, 2" zone tortion keys, 3" spindle lift. Trying to figure out what to go with for the rear, z71 coils or spacers?

View attachment 58874 View attachment 58873 View attachment 58872 2006 Yukon slt 2wd
5100 Bilstein all around, 2" zone tortion keys, 3" spindle lift. Trying to figure out what to go with for the rear, z71 coils or spacers?

I like it man. What size wheel spacers are you running?

 

[02Burgundybeast]

I like it man. What size wheel spacers are you running?

I am running the same lift on my 04 and I also ran this lift on my 02. I have a 1.75" wheel spacer on the rear and nothing on the front. The lift spindles push the front end out about 1.5" inches over stock. This makes the track width basically the same front and rear. It appears that @06yukon619 is running wheel spacers in the front and nothing in the rear.

 

[Hunters05hoe]

I am running the same lift on my 04 and I also ran this lift on my 02. I have a 1.75" wheel spacer on the rear and nothing on the front. The lift spindles push the front end out about 1.5" inches over stock. This makes the track width basically the same front and rear. It appears that @06yukon619 is running wheel spacers in the front and nothing in the rear.

Thanks man I'm just asking because Im running just keys upfront and want to throw some spacers on because I want my wheels out about an inch and a half

I am running the same lift on my 04 and I also ran this lift on my 02. I have a 1.75" wheel spacer on the rear and nothing on the front. The lift spindles push the front end out about 1.5" inches over stock. This makes the track width basically the same front and rear. It appears that @06yukon619 is running wheel spacers in the front and nothing in the rear.

Thanks for the reply. I only ask because I'm running aftermarket keys and I realllyy wanna get atleast 1.5 inch spacers but I don't see them fitting with my 35x12.5r20 toyos.

 

[02Burgundybeast]

Thanks man I'm just asking because Im running just keys upfront and want to throw some spacers on because I want my wheels out about an inch and a half

Thanks for the reply. I only ask because I'm running aftermarket keys and I realllyy wanna get atleast 1.5 inch spacers but I don't see them fitting with my 35x12.5r20 toyos.

You run anything less than a 1.75" Wheel spacer you will have to trim your wheel studs down.

 

[Hunters05hoe]

You run anything less than a 1.75" Wheel spacer you will have to trim your wheel studs down.

Yeah I'm thinking of either 1 3/4 or 2 inch I just think it's gonna make me rub way to bad

 

[02Burgundybeast]

Yeah I'm thinking of either 1 3/4 or 2 inch I just think it's gonna make me rub way to bad

The further that wheel comes out the worse it will get and the more you will have to trim. I had to cut the lower valance for 34.4x12s on my 22x9s