Post your lifts.

[06_2WD_Z71]

Update installed z71 springs. So currently have life Keys, passenger torsion bar on driver side, and z71 springs



Sent from my SM-G930V using Tapatalk

Good looking truck, better get some spacers in the back though or you will be getting pulled over for runnin' shine.

 

[Abard123]

I bought my 2003 Tahoe a little over a year ago. It already the lift so I'm not completely sure what it is, but I think it is a 5" Skyjacker. I added the wheels and 33" duratrecs. With the lift, tires, and G80, this thing is pretty unstoppable on the trails out here in Colorado.

 

[Countryboy07]

Finally happy with how mine is sitting: 38.5 front 39.25 rear - eBay keys, Bilstine 5100's, eBay 1.5" coil spacers, 1.5" wheel spacers, 275/60/20 Falken Wildpeak AT3's on OEM NNBS Sierra/Yukon wheels.

 

[harpsubb92]

6" Fab Tech


Sent from my iPhone using Tapatalk

 

[UtahYukon]

I'm new to GMC/Chevrolet but I can say I love this SUV. 6" Tough Country no body lift. I went from 33" 37" so I had to crank the keys a little and big hammered the back of the front wheel wells. I will eventually cut the front bumper. It doesn't rub except when turning in reverse, turning on bumps but going straight is smooth.

 

[01Konvict]

View attachment 66533 View attachment 66534

Very nice 2500! Def got the meaty tarz under it now

 

[06_2WD_Z71]

I'm new to GMC/Chevrolet but I can say I love this SUV. 6" Tough Country no body lift. I went from 33" 37" so I had to crank the keys a little and big hammered the back of the front wheel wells. I will eventually cut the front bumper. It doesn't rub except when turning in reverse, turning on bumps but going straight is smooth. View attachment 66533 View attachment 66534

Wow. When civilized society does finally break down, that is the truck I want.

 

[UtahYukon]

I read on the inter webs that I could cut to fit... so I did! Cut bumper and cut and ground the tar out of the rear of the front wheel well. If you do this WATCH OUT for the rear AC lines on passenger side.

 

[OhFourChevy]

Keys, Spacers, Cognito front sways, TJ rear sways, 17x9 4.5" back spacing, 295/70r17, wheels sprayed w/ bedliner, got beat up changing the tires so working on removing bedliner around the lip of the wheel, then polishing the aluminum or removing all and re-painting, shock extenders for now, Bilstein 5100s going on early next week

Coming soon
Spindles, c50r Spring, spohn track bar, ss brake lines, moog UCAs, pitman, idler, tie rod ends, 4.11 gears, tune

 

[02Burgundybeast]

Keys, Spacers, 3" Spindles, 22" Reps, 285/55r22 Nittos, bilsteins all around.