Disclaimer: Links on this page pointing
to Amazon, eBay and other sites may include affiliate code. If you click them and
make a purchase, we may earn a small commission.
Anyone else with these tail lights have a problem getting the sockets to line up to the new holes. My factory wiring on the right side was to short to put the upper bulb connector in the socket and mount it back up. I would have to extend the wires. Anyone else have to rig it up.
Just put them in a couple days ago. Harness is pretty tight but fit on mine. If they would have done the brake light in the center it would have made life easier.
Lights are all the same, just different retailers that sell them.
Mine are a very tight fit as well on the RT side. I just had to do that connector first and go down from there. No need to cut and splice wires for a tail light.
take a pic of the problem, so we can better assist
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.