Rear shock for police trucks. I think I got the wrong ones.

[jkssv08tahoe]

Hi everyone. Since my SSV had 138,000 miles on it now. I put new struts and shocks on my truck and I think I made a mistake with the rear shocks. I went to Rockauto to see what to get. Most shocks say do not fit police package. I found these on the rear shocks under increased handling/performance.

MONROE911545 {Click Info Button for Alternate/OEM Part Numbers} Reflex Monotube Rear; RWD; w/ Police Package

This was the difference between the old shock and new shock. It is a little smaller by 2 or 3 inches. I am guessing this is the wrong rear shock to have put on. Are these shocks for PPV trucks. Do I need to order different rear shocks for a SSV truck?

 

[CobraKing]

PPV truck rides lower and is RWD so that shock's probably for it.

You might be able to go with any OEM (non PPV) shocks for your SSV.

 

[iamdub]

I'd double check before mounting them in case you need to send them back. But, if the shock body under that cover is 2-3 inches shorter than the original, then it's probably ok. Most OEM shocks have to be compressed a couple inches to install them anyway. At least you should be ok for when you lower it.

 

[jkssv08tahoe]

I wish I had found this before ordering the shocks. The rears were wrong. Those were for the 2wd drive version trucks. https://www.shockwarehouse.com/news/gm-suv-suspension-decoder.cfm