- Joined
- Dec 8, 2016
- Posts
- 3,908
- Reaction score
- 4,932
Excellent work Mark!!
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Ok so The Beast is different. On The Machine it reads in degrees. I’m guessing the systems are different. What I see is 2 different voltages. The top one in the list on the Tech2 seems to be around 1 volt and the bottom one around 3 volts, then at 1/4 turn to the right the top goes to 3 and the bottom one to 1-ish and with the wheel upside down the top goes to around 4 and the bottom to 2-ish. Hope this helps.I already replaced the sensor, I cleared the code with the tech2 and still getting the code. I see the live data but I don't know what that data means.
Thank you Gary.Excellent work Mark!!
Something different.....right? Imo--$5500 seems ok, but I bet you could do better, maybe $3500--$4200. No one really wants 4 doors. If anyone were to buy it, would strictly be for parts--a parts car, and no one would give him that much for a parts car. Just my opinion tho. What motor and trans is in it? Manual brakes and steering? Back in high school my buddy had a 2 dr. No pwr options--at all. Had a straight 6 iirc. Looked badass tho. Was mint and jacked up with deep dish Cragers and BF Goodrich tires.I’m gonna put this here just because I’m only lightly considering buying a project even though I have no place to work on it at the moment. I would need to build a shop first but whatever lol. If I was to do this, I would do an LS swap and I would build a badass motor. I would also bag and body it. I haven’t looked into what this car would be worth yet so if anybody has a clue, or opinion, please chime in. It’s a 67 4 door Nova II. Both front floor pans need to be replaced. It runs and drives, the interior isn’t bad. Body looks pretty damn straight, all parts are there and the chrome looks pretty damn good considering. Guy wants 5500 but there might be room for negotiation. Sure would look nice laid out on billets. Being a 4 door might be a deal breaker though.
View attachment 259524 View attachment 259525 View attachment 259526 View attachment 259527
I dunno mark, if it was a 2 door I’d say yeah, do it...but 4 door..... not feelin it buddy.... we should ask the know it all.....I’m gonna put this here just because I’m only lightly considering buying a project even though I have no place to work on it at the moment. I would need to build a shop first but whatever lol. If I was to do this, I would do an LS swap and I would build a badass motor. I would also bag and body it. I haven’t looked into what this car would be worth yet so if anybody has a clue, or opinion, please chime in. It’s a 67 4 door Nova II. Both front floor pans need to be replaced. It runs and drives, the interior isn’t bad. Body looks pretty damn straight, all parts are there and the chrome looks pretty damn good considering. Guy wants 5500 but there might be room for negotiation. Sure would look nice laid out on billets. Being a 4 door might be a deal breaker though.
View attachment 259524 View attachment 259525 View attachment 259526 View attachment 259527
I’m gonna put this here just because I’m only lightly considering buying a project even though I have no place to work on it at the moment. I would need to build a shop first but whatever lol. If I was to do this, I would do an LS swap and I would build a badass motor. I would also bag and body it. I haven’t looked into what this car would be worth yet so if anybody has a clue, or opinion, please chime in. It’s a 67 4 door Nova II. Both front floor pans need to be replaced. It runs and drives, the interior isn’t bad. Body looks pretty damn straight, all parts are there and the chrome looks pretty damn good considering. Guy wants 5500 but there might be room for negotiation. Sure would look nice laid out on billets. Being a 4 door might be a deal breaker though.
View attachment 259524 View attachment 259525 View attachment 259526 View attachment 259527