Rocket Man's 2008 Bagged CC Silverado Build AKA "THE MACHINE"

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
Rocket Man

Rocket Man

Mark
Supporting Member
Joined
Dec 25, 2014
Posts
26,086
Reaction score
51,103
Location
Oregon
Looks great! What kind of work is involved with that kit?
The kit has some oxidation removal towelettes first, then a quick wet sand with 2000 and then 3000 using a little round holder and then wipe the clear sealer on. Easy peasy.
 
OP
OP
Rocket Man

Rocket Man

Mark
Supporting Member
Joined
Dec 25, 2014
Posts
26,086
Reaction score
51,103
Location
Oregon
Today I buffed out the damage down the whole passenger side of the hoe and managed to get the rear bumper to snap back into the fender. It looks so much better. I will remove the whole bumper at some point and try the hot water trick to try and get the dent out. I also ordered a used OEM right tail light because it’s broken, as well as brackets for the running board so it’s not pushed in. I might try to find a replacement RB later. I just finished my last round of chemo yesterday so I’m taking it easy. I got a bunch of other stuff dialed in on it. I don’t care for all the memory stuff and finally figured out why the passenger mirror was getting all whacked out every time I put it in reverse or forward and the seat would go crazy. The PO had it set up real weird, like they never figured it out so they must have adjusted everything every time, there was no way it was usable like it was set. Also found out the stereo has Sirius XM so that’s a bonus. It was a good day. Before pics.
 

Attachments

  • IMG_3700.jpeg
    IMG_3700.jpeg
    563.1 KB · Views: 2
  • IMG_3701.jpeg
    IMG_3701.jpeg
    145.7 KB · Views: 2
  • IMG_3702.jpeg
    IMG_3702.jpeg
    189.4 KB · Views: 2
  • IMG_3703.jpeg
    IMG_3703.jpeg
    195.7 KB · Views: 2
OP
OP
Rocket Man

Rocket Man

Mark
Supporting Member
Joined
Dec 25, 2014
Posts
26,086
Reaction score
51,103
Location
Oregon
After buffing and bumper reset.
 

Attachments

  • IMG_3704.jpeg
    IMG_3704.jpeg
    352.7 KB · Views: 2
  • IMG_3705.jpeg
    IMG_3705.jpeg
    221.3 KB · Views: 2
  • IMG_3706.jpeg
    IMG_3706.jpeg
    274.3 KB · Views: 2
  • IMG_3707.jpeg
    IMG_3707.jpeg
    426.1 KB · Views: 2
  • IMG_3708.jpeg
    IMG_3708.jpeg
    390.3 KB · Views: 2
OP
OP
Rocket Man

Rocket Man

Mark
Supporting Member
Joined
Dec 25, 2014
Posts
26,086
Reaction score
51,103
Location
Oregon
The Tahoe has some rattles going over bumps. I know the rear auto level system is shot; the air bags have huge holes in them and I’m sure the compressor is shot but that will have to wait. I remember the front end links are a bad design on the GMT900 so I took a look and of course they’re shot and the plastic parts have been hammered so there’s play and every time over a bump they’re banging. I ordered some Delphi that have metal sleeves that won’t wear out. I’ll get them on in a few days when it quits raining. I’d be willing to bet my rattles will be gone.
 

Attachments

  • IMG_3716.jpeg
    IMG_3716.jpeg
    366.4 KB · Views: 4
  • IMG_3717.jpeg
    IMG_3717.jpeg
    530.7 KB · Views: 4
  • image.jpg
    image.jpg
    274.9 KB · Views: 4

Forum statistics

Threads
133,690
Posts
1,889,476
Members
98,959
Latest member
CG11
Top