Service ride control messege??

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Wake

Full Access Member
Joined
Feb 14, 2012
Posts
418
Reaction score
21
Location
Stafford, VA
Could be several things. Each shock is connected to the ride computer along with the air compressor in the rear. You need to scan the body codes to determine what is causing your message.

My Escalade had two problems this year, one the left front shock connector was destroyed by years of salt intrusion, then the exhaust solenoid for the air compresson.
 
OP
OP
chacho44

chacho44

Full Access Member
Joined
Aug 19, 2010
Posts
245
Reaction score
0
Location
MOTORCITY
Ill start with the connections on the shocks. Maybe try to clean them up a bit, but i also forgot to adress that my compressor does not kick on. This has been like this for a while just never adressed it cause truck still rode fine.
 

einzunza

TYF Newbie
Joined
Dec 18, 2012
Posts
1
Reaction score
0
Mine has been saying the same things since I replaced my shocks. I had Monroes installed and I've been getting the same message, anyone have an idea on what it could be?
 
Last edited:

Forum statistics

Threads
132,425
Posts
1,867,911
Members
97,103
Latest member
Svk_22
Top