Servos

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

samwilkie

TYF Newbie
Joined
May 25, 2012
Posts
23
Reaction score
0
Location
Cleveland,TN
Sweet I'll order mine today. Just wanted to make sure it was safe( knock on wood) it shifts great now just didnt screw it up..
 

chacho44

Full Access Member
Joined
Aug 19, 2010
Posts
245
Reaction score
0
Location
MOTORCITY
It makes your shifts faster and firmer. It comes stock in the transmissions that corvettes use. It takes about 30mins to put in, in your driveway. I had a lift so took me about 10mins. Highely recommended for all 4L60e transmissions. It also holds the band inside to prevent slipping.

Here is the link I bought mine from.
http://tinyurl.com/avxvj75

I installed one in my old 00yukon with 60E, I'd like to slap one in my 03 escalade esv. I don't remember if it has the 65 or 70E, but will this servo you have one listed work on my trans? I wanna say yes but need a second opinion.
 

saif najd

Full Access Member
Joined
Dec 25, 2012
Posts
567
Reaction score
0
I installed one in my old 00yukon with 60E, I'd like to slap one in my 03 escalade esv. I don't remember if it has the 65 or 70E, but will this servo you have one listed work on my trans? I wanna say yes but need a second opinion.


Great so what did you notice? After the replacement

98 Chevy Tahoe 2dr Sport
 
OP
OP
Big Buttons

Big Buttons

The SS Burb
Supporting Member
Joined
Nov 10, 2010
Posts
3,479
Reaction score
36
Location
South Texas
I installed one in my old 00yukon with 60E, I'd like to slap one in my 03 escalade esv. I don't remember if it has the 65 or 70E, but will this servo you have one listed work on my trans? I wanna say yes but need a second opinion.

Yes it will. The 65E and 70E are just beefed up a little more than the 60E. but if you have the 80E that one wont work.
 

chacho44

Full Access Member
Joined
Aug 19, 2010
Posts
245
Reaction score
0
Location
MOTORCITY
Yes it will. The 65E and 70E are just beefed up a little more than the 60E. but if you have the 80E that one wont work.

Ok sweet, I'm gonna order it then. Also for the other 3-4 gears that is another servo correct? I don't mind doing the 3-4 servo as well, I wanna say the servo you have listed just helps the 1-2 correct?

---------- Post added at 07:12 AM ---------- Previous post was at 07:02 AM ----------

http://www.amazon.com/gp/aw/d/B0081H7E58/ref=mp_s_a_1?qid=1363172839&sr=8-1-fkmr1&pi=SL75

I wanna say this is the same one right, just comparing prices.
 
OP
OP
Big Buttons

Big Buttons

The SS Burb
Supporting Member
Joined
Nov 10, 2010
Posts
3,479
Reaction score
36
Location
South Texas
Ok sweet, I'm gonna order it then. Also for the other 3-4 gears that is another servo correct? I don't mind doing the 3-4 servo as well, I wanna say the servo you have listed just helps the 1-2 correct?

---------- Post added at 07:12 AM ---------- Previous post was at 07:02 AM ----------

http://www.amazon.com/gp/aw/d/B0081H7E58/ref=mp_s_a_1?qid=1363172839&sr=8-1-fkmr1&pi=SL75

I wanna say this is the same one right, just comparing prices.

Unless you plan on building and racing your truck the 3-4 is not needed. If you get the billet one it will be too much on a stock truck and transmission.

That one on amazon will work. I got that one off ebay because I trust that transmission shop a lot.

---------- Post added at 06:10 PM ---------- Previous post was at 06:10 PM ----------

Good question...

How about this?
Sonnax 4L60-E 4L65-E 4L70-E Pinless Forward Accumulator Piston Kit

http://www.amazon.com/gp/aw/d/B00BCNG4Q8/ref=mw_dp_mpd?pd=1

98 Chevy Tahoe 2dr Sport

Not needed.... You have to take out your valve body to put that in.
 

chacho44

Full Access Member
Joined
Aug 19, 2010
Posts
245
Reaction score
0
Location
MOTORCITY
Ordered one from fleabay today, I hopeit performs as well as the one in my old yukon
 

Forum statistics

Threads
132,749
Posts
1,873,530
Members
97,575
Latest member
Goliath23
Top