Show off your 2015+ leveled Tahoes and Yukons!

[01Konvict]

Put on CK 158 Replicas with Nitto G2's. Leveled the front 1.5"View attachment 185259

I like the setup and the MXZ looks sweet too. Curious about actual tire width of those 305 g2. Could you measure actual tread width?

 

[CBMarucco]

View attachment 68878 View attachment 68879 View attachment 68881

Hey Newman - what’s your setup here? Love it! Level? Front/back size? Tires brand/size?


Sent from my iPhone using Tapatalk

 

[ttusomeone]

Finally added a 2" RC leveling kit and Toyo RT tires (285/65R18) to my Z71. After looking around at all the aftermarket wheels, I decided that I really liked the stock ones. I've posted one before and three after pictures. It sits pretty level - maybe just slightly lower in the front. My drive slopes down so the pictures are a little deceptive. I've ordered some Bora 1.5" wheel spacers. I think it will give it the stance I'm going for - besides, I'm getting a very slight rub on the upper inner A arm at full lock. If I do ever go aftermarket wheels, I'm looking for an 18" with about -12 offset, so the spacers will also show me what that will look like. I also ordered a Hypertech Max Energy 2, mainly to adjust the tire size. I'll also adjust the AFM to only come on at highway speeds, then decide if I want to mess with any of the performance settings. Besides that, I've already installed a Borla cat-back exhaust.

(Also sorry it's not clean for the pictures...)

 

[Tregs]

I read through all pages and didn't find anything about using 2.5"/1.5" level on airride equipped vehicles. I have a 2015 Yukon SLT with air ride / auto ride. I see that the suspensionmaxx system comes with brackets for magneride on the Denali, but i didn't see anything about airride. Has anybody installed on airride equipped yukon SLT's?
Thanks.

 

[01Konvict]

I read through all pages and didn't find anything about using 2.5"/1.5" level on airride equipped vehicles. I have a 2015 Yukon SLT with air ride / auto ride. I see that the suspensionmaxx system comes with brackets for magneride on the Denali, but i didn't see anything about airride. Has anybody installed on airride equipped yukon SLT's?
Thanks.

SLT is same suspension as Denali. So maybe not done on your model but it will work.

 

[Tregs]

I had a chance to look under it tonight. I found the sensor in the rear, it I don't have it in the front. I found another of your threads that has pics of the front sensor. I don think I have it. As you suggested in your other thread, I'll either get the connectors from FTS or get allthread. I think I'll go with 2.5"/1.5" with 275/60R20 BFGAT or Nitto Grappler G2. Can't decide.

 

[Dave Legacy]

In my experience the BFG AT KO2 is a superior tire. I’ve had two sets of Nitto Terra Grapplers albeit first gen, not G2.

 

[Robbys3m3]

Put on CK 158 Replicas with Nitto G2's. Leveled the front 1.5"View attachment 185259

Love this!

 

[JennaBear]

Suspension maxx 1.5” and yes the kit came with the adapters.

Thank you for the pix and the info, you helped make my tire decision easier!

 

[Rock]

Finally added a 2" RC leveling kit and Toyo RT tires (285/65R18) to my Z71. After looking around at all the aftermarket wheels, I decided that I really liked the stock ones. I've posted one before and three after pictures. It sits pretty level - maybe just slightly lower in the front. My drive slopes down so the pictures are a little deceptive. I've ordered some Bora 1.5" wheel spacers. I think it will give it the stance I'm going for - besides, I'm getting a very slight rub on the upper inner A arm at full lock. If I do ever go aftermarket wheels, I'm looking for an 18" with about -12 offset, so the spacers will also show me what that will look like. I also ordered a Hypertech Max Energy 2, mainly to adjust the tire size. I'll also adjust the AFM to only come on at highway speeds, then decide if I want to mess with any of the performance settings. Besides that, I've already installed a Borla cat-back exhaust.

(Also sorry it's not clean for the pictures...)


View attachment 186366
View attachment 186367 View attachment 186368 View attachment 186369

How is the road noise with those tires? Noticeable on Hwy? Looks great!