Show off your 2015+ leveled Tahoes and Yukons!

[Jeff_]

Here is a teaser. I will pull it out to get better photos later and post a new thread as I don’t think anyone has done a complete write up on this kit for the 15-20 trucks on here yet.

View attachment 449761View attachment 449762
View attachment 449763View attachment 449764

Damnit. This looks too good.
Thanks for sharing. Good inspiration for me to do some day.

 

[Tahoe_Rx]

Damnit. This looks too good.
Thanks for sharing. Good inspiration for me to do some day.

Here is one more until I have time to take some decent photos and do a full write up haha.

 

[Rustylane7]

@Rustylane7 - those could be a bit too tall with stock suspension. I was running 33" tires with a 2-3" ride height increase up front and clearing fine with that.

I'm just going to go for it. The z71 seems to sit higher than a regular hoe. I'll report back with pics.

 

[Rustylane7]

Here is one more until I have time to take some decent photos and do a full write up haha.

View attachment 449835

How do they ride? I had Fox 2.0s on my 2011 F150 and they definitely stiffened the truck up but was satisfied overall. Im leaning toward the Billstein 6112s on the tahoe just to try something different. Or possibly the Dobinson kit.

 

[Tahoe_Rx]

How do they ride? I had Fox 2.0s on my 2011 F150 and they definitely stiffened the truck up but was satisfied overall. Im leaning toward the Billstein 6112s on the tahoe just to try something different. Or possibly the Dobinson kit.

Ride is great. Stiffened up some; eliminated nose dive when stopping, nose dive or lean when cornering etc. but still comfortable. Biggest improvement is the rebound after a big bump. On the stock suspension I would bounce up and down 3 or 4 times after a big bump before the suspension settled. Now you go over the bump and it immediately settles. So instead of feeling like 5 bumps it feels like 1 bump

 

[Tahoe_Rx]

How do they ride? I had Fox 2.0s on my 2011 F150 and they definitely stiffened the truck up but was satisfied overall. Im leaning toward the Billstein 6112s on the tahoe just to try something different. Or possibly the Dobinson kit.

I considered the 6112s but it seemed like you could only get 1” of lift out of them and they don’t recommend running a spacer on top. That is ultimately what pushed me to the 3” Cognito lift.. only other choice would have been a Cognito 3” lift with kings instead of the Fox 2.0s. The kings 2.5 probably feels more similar to the 6112s. But the kings were not in the budget at the moment