So confused!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

scunningham

TYF Newbie
Joined
Oct 17, 2024
Posts
1
Reaction score
0
Anyone's 07 denali stall after 15 minutes of driving, stablitrak light on, traction control light on and tachometer not move plus a misfire? Is this a computer issue. I can't figure it out?
 

Joseph Garcia

Supporting Member
Joined
Aug 2, 2018
Posts
7,340
Reaction score
9,919
Welcome to the Forum from NH.

Lots of knowledgeable folks here who freely share their knowledge, experiences, and perspectives. Knowledge is power.

I hope that you will become a participating member in the Forum's discussions.

Pics of the truck, please.

Can you provide us with some additional information? When it stalls, does it die suddenly of sputter slowly to a stall? After stalling, does it start right back up again? Were the warning lights coming on before this stalling started? Were any repairs or maintenance performed on the truck shortly before the stalling started?

Do you have access to a quality bi-directional scanner to perform troubleshooting procedures?
 

jdwood1111

Full Access Member
Joined
Jun 16, 2022
Posts
117
Reaction score
144
Does it turn off and then start back up again totally fine or is it like that permanently now?

I am not a great diagnostics guys but an ok find a video and "fix" guy. However, based on what I have read around here, it sounds like it could be a ground issue that once hot, causes some issues. Maybe chase down your ground wires and connections and double check them. Fuses too. Although a misfire could be a loose sparkplug wire or bad wire, coil packs, etc. Maybe stop by an Auto Zone or Advanced to see what cylinder it is and check the wire/packs.
 

Forum statistics

Threads
132,301
Posts
1,865,639
Members
96,885
Latest member
BinOdhaib
Top