2007 escalade
6l80e
250000 miles
Just like the title says my truck has the cam position sensor code and check engine light on and displays the stabilitrac and Tc lights. My tranny has been shifting and clunking very hard especially on 1-2 shift up and down. When the error lights are on It also idles very low and strained and tries to lurch and bucks when shifted into drive or reverse with foot on brake. It also sometimes just looses its gear while driving snd just revs until i slow down and let it hit first or second gear then will take off snd bang off each gear normally. I just did the cam position sensor and the ce went away for a while but came back on as I feared when I test drove for a half hour. So here's the part that gets me...if I unhook battery the thing shifts soft and smoothly and dosent do all the crap the tranny does until the stsbilitrac and Tc lights come on. I just reset it again and the ce light stayed off but the stabilitrac light came on within 5 mins of driving. As soon as the error lights come on it starts to shift hard and clunk. I don't know what to do since the only code it's giving is the cam position sensor code (can't remember it right now).
For those of you who read all the crap my tranny is doing...I KNOW. It's on its way out. It's got a quarter million miles on it. I just want to drive it until it grenades. Or if there is a cheaper fix like replace the torque converter let me know. Am I on the right track thinking the converter needs replacing? What should I do about the error lights?
Sent from my SM-T230NU using Tapatalk
6l80e
250000 miles
Just like the title says my truck has the cam position sensor code and check engine light on and displays the stabilitrac and Tc lights. My tranny has been shifting and clunking very hard especially on 1-2 shift up and down. When the error lights are on It also idles very low and strained and tries to lurch and bucks when shifted into drive or reverse with foot on brake. It also sometimes just looses its gear while driving snd just revs until i slow down and let it hit first or second gear then will take off snd bang off each gear normally. I just did the cam position sensor and the ce went away for a while but came back on as I feared when I test drove for a half hour. So here's the part that gets me...if I unhook battery the thing shifts soft and smoothly and dosent do all the crap the tranny does until the stsbilitrac and Tc lights come on. I just reset it again and the ce light stayed off but the stabilitrac light came on within 5 mins of driving. As soon as the error lights come on it starts to shift hard and clunk. I don't know what to do since the only code it's giving is the cam position sensor code (can't remember it right now).
For those of you who read all the crap my tranny is doing...I KNOW. It's on its way out. It's got a quarter million miles on it. I just want to drive it until it grenades. Or if there is a cheaper fix like replace the torque converter let me know. Am I on the right track thinking the converter needs replacing? What should I do about the error lights?
Sent from my SM-T230NU using Tapatalk
