strutaeng's 04 2500 4x4 project Suburban

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
strutaeng

strutaeng

Full Access Member
Joined
Aug 10, 2023
Posts
1,172
Reaction score
2,426
Location
Dallas, Texas
Well Saturday my oldest daughter had a championship M.S. varsity volleyball game. Unfortunately, they lost. Got home and they had 50% chance of rain, so all I did was wash and held off masking. I did an engine oil change instead. The drain bolt was super clean. Of course, it didn't rain on Saturday after all, LoL. But Sunday we got a downpour.

Tonight I dropped the transmission oil pan. I started loosening the bolts and ATF started dripping everywhere. This pan doesn't have a drain bolt. I grabbed a drill and drilled a small hole where the drain bolt would go (I have another drain pan with the drain bolt laying around to swap.) Kinda of a pain actually to remove though. I realized towards the end the crossmember has these holes to slide a 1/4" ratchet and put a socket at the other end to remove the rearmost bolts.
 

Attachments

  • IMG_20241119_210443998.jpg
    IMG_20241119_210443998.jpg
    212.9 KB · Views: 3
  • IMG_20241117_142637074.jpg
    IMG_20241117_142637074.jpg
    159.2 KB · Views: 3
  • IMG_20241116_153200370.jpg
    IMG_20241116_153200370.jpg
    427.4 KB · Views: 3

Forum statistics

Threads
132,266
Posts
1,865,040
Members
96,829
Latest member
Stanlee83

Latest posts

Top