Suggestion for 4x4 drop kits

[BMPNUGLS]

Ya I'll eventually just bite the bullet and make time to do it myself! I've lowered half a dozen GM trucks in my days...most with full rear flip kits and frame notching etc...but now w 4 kids and a job where I travel a large percentage of my work weeks....when I have a free weekend I usually plan a golf outing or the wife has a 'list' a mile long!! Lol

 

[NORCAL SS]

LOL NO problem

 

[2016YUKONSLT]

ive done many.

heres a full write up on what i set them up with

Why is he cutting the stop at 3:48?

 

[NORCAL SS]

He tried to get away without doing free travel mod. You cant. He ended up cutting bracket off like I told him and now rides much better

 

[2016YUKONSLT]

He tried to get away without doing free travel mod. You cant. He ended up cutting bracket off like I told him and now rides much better

So you don't need to cut the strut bump stop if you do the free travel mod?

 

[NORCAL SS]

So you don't need to cut the strut bump stop if you do the free travel mod?

he put the bumpstops on htining he would be fine by cutting them. He then realized it didnt ride well so cut the bracket off the frame and was fine after

 

[16SLT]

I am in MO but down at The Fort. I used the craft shop on base which is basically an 8 bay shop you can rent for an hourly amount. I don't have air ride, but did the 2" rear drop myself in an hour and a half with no directions. Good luck, if you have a basic
Mechanical knowledge you can do it.

 

[2016YUKONSLT]

He tried to get away without doing free travel mod. You cant. He ended up cutting bracket off like I told him and now rides much better

The one he cut in half was for the front, what does this have to do with the free travel mod, which is the rear?

 

[lynxnova]

^ I would like to know also.... why did he cut the bumpstop on the front strut ?


Sent from my iPhone using Tapatalk

 

[NORCAL SS]

you have to cut bumpstops on front struts due to changing shock stroke when using the lowering mounts