TIGHTEN FUEL CAP Message - Check Engine Light on

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
JochenWoern

JochenWoern

Full Access Member
Joined
Sep 29, 2011
Posts
2,427
Reaction score
18
Location
Sacramento, CA
Still having issues

Unfortunately, the CHECK ENGINE LIGHT came back on this morning. :-(

Guess I will have to go to the dealership, unless anyone else has any valuable input.

Thanks for the help.

CHECK ENGINE LIGHT never went off AFTER installaing the following:

- A new Gas Cap
- A new AC DELCO CANISTER PURGE SOLENOID VALVE, part #214-2149

I therefore went to the dealer, who says that the only thing left which could cause my issues is the following:

- Fuel tank pressure switch, GM Part # 16238399-31133.

Anyone else had this problem and can you possibly confirm that this is my issue?

Thanks in advance.
 
Last edited:

jshaw5

TYF Newbie
Joined
May 22, 2015
Posts
5
Reaction score
3
Did the fuel tank pressure switch fix the problem?
 

05YukonXL

Member
Joined
Jan 16, 2014
Posts
42
Reaction score
18
Location
South Carolina
Digging up this old thread to inquire ... did the Fuel Tank Pressure Sensor do the trick? I've done the fuel cap, evap canister and evap solenoid (blew out all the charcoal too), still getting check engine. Thanks.
 

ivin74

05 NBS Nali
Joined
Aug 3, 2014
Posts
2,384
Reaction score
2,493
Location
Htown, Texas
Digging up this old thread to inquire ... did the Fuel Tank Pressure Sensor do the trick? I've done the fuel cap, evap canister and evap solenoid (blew out all the charcoal too), still getting check engine. Thanks.


Did you use oem parts? Autozone/aftermarket are junk.

Give it a shot, you got nothing to loose it's the last part that can cause that code. The bad thing is that you have to drop the gas tank to get to the sensor.
 

HiHoeSilver

Away!
Joined
Feb 28, 2017
Posts
10,918
Reaction score
14,572
Location
Chicago
Digging up this old thread to inquire ... did the Fuel Tank Pressure Sensor do the trick? I've done the fuel cap, evap canister and evap solenoid (blew out all the charcoal too), still getting check engine. Thanks.

What code are you getting? You say evap solenoid. Did you do the vent valve down by the tank, the purge valve up in the engine bay, or both?
 

treehan77

TYF Fiend
Joined
Feb 1, 2015
Posts
1,418
Reaction score
1,182
Location
Crestview, FL
The first EVAP canister solenoid i replaced (AC DELCO) was bad. It happens. Easy to bench test though with 12v power.
 

Forum statistics

Threads
132,714
Posts
1,873,072
Members
97,537
Latest member
CHENTE

Latest posts

Top