eand28
Full Access Member
If you have a 00-02, it would be easier to swap the 02 esky powerfold mirrors in with the switch that goes where the 4wd controls would be than the 03+ style. Would be pretty easy to grab that stuff out of a junkyard
Tonyrodz's Tahoe Build Thread
- Thread starter Tonyrodz
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Onebad1983
Resident Country Dumbass
- Joined
- Mar 5, 2018
- Posts
- 1,262
- Reaction score
- 1,128
but what if I have a 4x4?
Yeah I agree considering the 05 mirrors I looked at had nowhere to plug in on my 02. I’m not interested in cutting the connectors off and wiring each wire to different connectors, the 05 has about 10 extra wires going to the mirror.
eand28
Full Access Member
You’re SOL. Could put the switch somewhere else though
Onebad1983
Resident Country Dumbass
- Joined
- Mar 5, 2018
- Posts
- 1,262
- Reaction score
- 1,128
SOL?
OP
OP
Tonyrodz
Resident Resident
Onebad1983
Resident Country Dumbass
- Joined
- Mar 5, 2018
- Posts
- 1,262
- Reaction score
- 1,128
Thanks buddy
915_Tahoe
Your GM Parts Specialist
i'm going to use a rear window switch from a 99-03 protege. already figured out the wiring just, need to source out the switch and pigtail from the junk yard. the switch is flat so might mount it to the outlet plate in the center console.
OP
OP
Tonyrodz
Resident Resident
Got a pic of that switch?
915_Tahoe
Your GM Parts Specialist
This is what I'm going to use.
2 wires go to both of the fold motors (in/out)
1 power
2 grounds
Already tested it with the front window switch from the mazda protege, but to bulky to mount. So I'll be using the rear window switch which is flat and will sit flush.
Last edited:
