Hi all, I just got some Amazon OE-style tow mirrors and installed them last night. Driving around today, I realized there was something wrong with the driver's side mirror - even with the glass adjusted all the way outward, all I could see was the side of the truck. It was pretty much unusable. I took a closer look and it appears the angles and of the driver's side and passenger side mirror are different. I don't have a protractor to measure it but I estimate that the driver's side is at least 10 degrees closer to the truck than the passenger side.
Then I folded them both inward. Take a look at the pics. The passenger side leaves a good 3-4 inches between the mirror and door when folded fully inward. The driver's side is nearly touching the door. So both the folded and unfolded stop points of the mirror are too far inward. I can push the mirror out but it just springs back to it's preset stop point.
I've contacted the Amazon seller to see if he'd be willing to exchange just the one side, but in the meantime, is this something that is adjustable by me? Thanks all
Then I folded them both inward. Take a look at the pics. The passenger side leaves a good 3-4 inches between the mirror and door when folded fully inward. The driver's side is nearly touching the door. So both the folded and unfolded stop points of the mirror are too far inward. I can push the mirror out but it just springs back to it's preset stop point.
I've contacted the Amazon seller to see if he'd be willing to exchange just the one side, but in the meantime, is this something that is adjustable by me? Thanks all