Transmission help!

[Kemo13]

Wondering if anyone put a tranny from 2000 suburban to 2000 yukon denali? Or is that transmission not compatible with my yuk.

The torque converter bolt holes seem to a quarter inch or so off either flexplate holes. Have the holes in the flexplate drilled out to match torque converter? Do i need a flexplate spacer as well?

 

[01ssreda4]

The trans itself is the same, and will interchange. On some of the early iron block engines they had a long crank snout which would make the flexplate different. But basically all 99-06 transmissions interchange without issue.

 

[Kemo13]

The trans itself is the same, and will interchange. On some of the early iron block engines they had a long crank snout which would make the flexplate different. But basically all 99-06 transmissions interchange without issue.

So i need the flex plate adapter? New flexplate? Or a tc that will mate with the flexplate i have on now?