Trnasmision GonAAAA

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

bigJay63

TYF Newbie
Joined
Nov 9, 2024
Posts
2
Reaction score
1
2011 gmc yukon xl

transmission is slipping when it gets hot and i throws 2 codes

P0796_00 Pressure control solenoid 3 stuck off

P0989_00 Transmission Fluid Pressure (TFP) Switch 5 Circuit Low voltage


eeeeeeesd

ddddddddddoooooooooooooooooooooooooooooooooooooooooooooooooo
 
Last edited by a moderator:

NickTransmissions

Sin City
Supporting Member
Joined
Mar 9, 2023
Posts
1,086
Reaction score
2,608
Location
The transmission bench
2011 gmc yukon xl

transmission is slipping when it gets hot and i throws 2 codes

P0796_00 Pressure control solenoid 3 stuck off

P0989_00 Transmission Fluid Pressure (TFP) Switch 5 Circuit Low voltage


eeeeeeesd

ddddddddddoooooooooooooooooooooooooooooooooooooooooooooooooo
Drop the pan and see what's at the bottom then refer to my 6L80 Information thread for the link to the ATSG manual so you can research those codes and perform continuity testing on the applicable solenoid and pressure switches to confirm/deny the DTCs. You'll need to remove the TEHCM to do this testing; purchase SnapOn's 10EPL socket - this is a modified inverted Torx 12 socket specifically made for GM TEHCM/Valve Body Assembly-to-transmission case bolts...Undo the white locking latch prior to removing any bolts.
 
Top