truck is leaking AGAIN!!!!

[Gzes]

If u cant duck it **** it. Lol jk but yea its probably just a hose so get it n fix it

 

[992dr]

Thankfuly it seems to be an easy fix.

 

[SunlitComet]

easy but messy. maybe 10-20 minutes.

 

[Donnie Yukonie]

yea i think im going to try and fix it tom maybe sun do you have a good part number? or brand

 

[Tbruz]

Its the heater mixer valve.
Delco P/N 12380318 about $35 from the dealership.
Tbruz
it's unlikely that the valve is actually the problem, most likely is the hoses and/or clamps but while you're in there with an empty cooling system, might as well change all that out anyways.

 

[Donnie Yukonie]

Its the heater mixer valve.
Delco P/N 12380318 about $35 from the dealership.
Tbruz

thanks buddy

 

[SunlitComet]

beat me to part number. but that's okay i had a bigger fish to fry suddenly.

 

[TORONTO 95 GT]

Mine was the valve and not the hoses. Like said before, change it all and be done with it. That is what I did but even after that I chased leaks, quick connects and then the intake started weeping but not into combustion chambers or oil, just leaking to external. I have not pulled the intake yet as I will just pull the motor and either crate it or rebuild it. 95 TBI with 200K miles on it will do well holding something in the middle of the lake.

 

[Gzes]

The valve on my dads truck did the same but it broke so yea they can go bad. But hurry up n fix it don before it goes boom

 

[SunlitComet]

Boom!!!