tune up

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

black95

Full Access Member
Joined
Aug 24, 2009
Posts
383
Reaction score
3
Location
Freeport,NY
did a tune up last spring. time for one again as winter is slowly ending. i used acdelco plugs. is there any better? i used wires made by EXACT didn't hold up well , major performance loss over time. what are some good wires? any suggestions on a cap and rotor?

---------- Post added at 08:12 PM ---------- Previous post was at 08:09 PM ----------

sorry just realized i did this in GD. don't know how to or if it possible to move it to performance.
 
Last edited:

Brandon X

Full Access Member
Joined
Nov 25, 2009
Posts
1,360
Reaction score
2
Location
Michigan
Yeah im interested in this aswell as im getting a tune up in a week. I'm thinking about going with E3 plugs but ive read mixed reviews about them.
 
OP
OP
black95

black95

Full Access Member
Joined
Aug 24, 2009
Posts
383
Reaction score
3
Location
Freeport,NY
i have heard people say they are great and others say don't waste ur money stickk with $1.99 delcos
 

ChrisInWI

TYF Newbie
Joined
Feb 3, 2010
Posts
22
Reaction score
0
Location
SW Wisconsin
me too??? x3.... I bought the delcos because alot of people seemed to insist that the 350 vortecs liked them the best by far. word of caution, don't trust the gap out of the box - I checked mine w/ 3 different gap tools and they were WAY undergapped from specs. the boxes weren't smashed or anything so who knows why!?

I believe many people recommend MSD stuff too, but I don't wanna pay $100 for a set of wires. Has anyone used the less expensive MSD set of wires and what's been your success???
 
OP
OP
black95

black95

Full Access Member
Joined
Aug 24, 2009
Posts
383
Reaction score
3
Location
Freeport,NY
come on guys , some one has an answer ,there are 3 people asking here!!
 

rich5368

Full Access Member
Joined
Feb 18, 2010
Posts
237
Reaction score
0
Location
Cheyenne, WY
I don't know about the other brands. I don't use them. I've had my truck for 150k miles and Delco plugs and wires are all I use. You can't go wrong with stock replacements.
 

95TwinTT

Full Access Member
Joined
May 23, 2009
Posts
357
Reaction score
0
Location
Minnesota
OK, here it is, a dyno test of 12 different sets of spark plugs. The results of the testing is in the latest issue of Street Thunder. They pretty much covered them all from AC to Bosch and several grades of each.

Bottom line was,
the Autolite double platinum, came in the lowest, with 405.4 HP.

The winner was the NGK G-Power @ 416.7 HP

This was a very serious test on an engine dyno with the only difference being the plugs. They even rotated and went back to a set of plugs to verify the results of earlier tests.

The test is in the March/April issue. The NGK G-Power was also the cheapest plug of all they tested. Just goes to show, the price does not guarantee results. :)
 

Forum statistics

Threads
132,125
Posts
1,862,722
Members
96,618
Latest member
DENALI4225

Latest posts

Top