Under hood storage

[Drok]

ammo can and its waterproof as long as the seal is good. The only other issue would be rust if its not secured and gets deep scratches easy fix though.

 

[cardude2000]

Burrito cooker?




Sent from my iPhone using Tapatalk

 

[George B]

ammo can and its waterproof as long as the seal is good. The only other issue would be rust if its not secured and gets deep scratches easy fix though.
View attachment 251919

I have been looking for just this. What size is that can?

 

[Drok]

I have been looking for just this. What size is that can?

not my pic its what ive been wanting to do just havent yet haha, it looks to be a 50 cal M2a1/a2

 

[George B]

not my pic its what ive been wanting to do just havent yet haha, it looks to be a 50 cal M2a1/a2

Well, you nailed it! It’s an M1a2 can. By the dims I find thats about all that will fit short of making a custom box. I found several sellers online and will be ordering one up.

 

[gat0r]

also look for the 'fat 50' ammo cans

& swag offroad has a unique can mount, that could give someone creative ideas on best way to mount it



fat50 - PA108= 11.875 x 6.75 x 8.175 = 655.28 cubic inches
M2A1 (common .50 ammo can) = 11 x 5.563 x 6.75 = 413.05 ci

 

[Drok]

Yeah i have a few of those cans. Haha

 

[PG01]

Yeah i have a few of those cans. Haha

I think we all do.....lol

 

[George B]

also look for the 'fat 50' ammo cans

& swag offroad has a unique can mount, that could give someone creative ideas on best way to mount it



fat50 - PA108= 11.875 x 6.75 x 8.175 = 655.28 cubic inches
M2A1 (common .50 ammo can) = 11 x 5.563 x 6.75 = 413.05 ci

I actually test fit a fat 50. It is just a hair too big. It doesn’t sit flat in the tray and interferes with the pcm mount. If I would raise it up it interferes with the washer fluid neck and it is hard to get past the upper radiator hose. If it wasn’t for that corner support rod it might be ok but its tight.