Valence

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
rushingman

rushingman

TYF Newbie
Joined
Apr 21, 2014
Posts
28
Reaction score
0
If I decided to put the door moldings back on, how would I do that, because I took one off, and it took about two hours total to get it off and get some if the adhesive off, but it's still not all the way off.


Sent from my iPhone using Tapatalk
 

middelgriff1

Full Access Member
Joined
Jun 14, 2013
Posts
189
Reaction score
10
Location
Maryland
Take a razor blade and scrape most of the tape off the molding, then adhesion promoter on the molding and new double sided tape.

To take them off easier, use fishing line in a sawing motion
 
OP
OP
rushingman

rushingman

TYF Newbie
Joined
Apr 21, 2014
Posts
28
Reaction score
0
I mean how to put it back on


Sent from my iPhone using Tapatalk
 

Ben

Supporting Member
Joined
Sep 19, 2009
Posts
2,702
Reaction score
24
Location
PCB, FL
Dude take them off you're just doing it the hard way


Sent from my iPhone using Tapatalk

---------- Post added at 10:12 PM ---------- Previous post was at 10:10 PM ----------

Get a heat gun and heat that shit off don't use razors or anything use high test fishing line and run it behind the molding then use a 3m eraser wheel and the stickum comes right off then polish wash and wax


Sent from my iPhone using Tapatalk
 
OP
OP
rushingman

rushingman

TYF Newbie
Joined
Apr 21, 2014
Posts
28
Reaction score
0
If tried using a heat gun, but it doesn't work like everyone else is saying.
And I've read somewhere using fishing line can potentially scratch your paint


Sent from my iPhone using Tapatalk
 

Ben

Supporting Member
Joined
Sep 19, 2009
Posts
2,702
Reaction score
24
Location
PCB, FL
Damn dude... I did it on both my NBS tahoe and my NNBS tahoe... I just heated it up enough to get the end up then just ripped that shit off, I let the 3m wheel do all the work with the left over adhesive.
 
OP
OP
rushingman

rushingman

TYF Newbie
Joined
Apr 21, 2014
Posts
28
Reaction score
0
Can I get the 3m wheel at Walmart?


Sent from my iPhone using Tapatalk

---------- Post added at 12:01 PM ---------- Previous post was at 11:58 AM ----------

If so, what section of Walmart?
I didn't realize I was posting this in the wrong post, meant to post all this in my side moldings post. Oh well


Sent from my iPhone using Tapatalk
 

chicksdigit

Full Access Member
Joined
Apr 16, 2014
Posts
89
Reaction score
0
I need a 33 eraser wheel. Is there any auto store that carries them or just gotta get it online?
 

Forum statistics

Threads
131,405
Posts
1,850,454
Members
95,496
Latest member
dap365
Top