Water Leak(s) 2013 SSV

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

MD Tahoe 13

TYF Newbie
Joined
May 15, 2018
Posts
23
Reaction score
7
I may have some water leaks in my Tahoe. This is my first post here. We had a very, very heavy rain last night on the east coast and I could hear water shaking around somewhere in my 2013 Tahoe SSV on my drive to work in the morning. I pulled the weather strip slightly back on the right rear passenger door, and water starting leaking out everywhere. Where could this water have come from? The seams of the right rear window?


tahoe leak 1.jpg tahoe leak 3.jpg tahoe leak 2.jpg


The day I picked up this Tahoe from IL, I drove it back to MD through some snow up in PA. The roads were heavily salted. The next day, I noticed salt build up around the driver door weather strip. Later that week I removed and plugged the police spotlight. There is still a notch cut out in the door. The weather strip appears to be cut and worn down with a little rust by the feet. Since removing the spotlight, I haven't noticed any more leaks, but my guess is that the whole weather strip needs to be replaced. Anyone have experience with this problem?


driver leak 2.jpg
 

2011SSVHOE

I'm an egual oportunity offender
Joined
Dec 2, 2016
Posts
1,395
Reaction score
996
Location
The Heart of The Triad, North Carolina
My weather strip looks like yours, they are like 90bucks on EBay.

The water draining from the door is normal, However if you hear schloshing around that means that the door drains are clogged.

Also make sure your roof holes are properly plugged.


Thirdly, Welcome to TYF from NC
 

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
26,303
Reaction score
39,458
Location
Stockton, Ca.
I may have some water leaks in my Tahoe. This is my first post here. We had a very, very heavy rain last night on the east coast and I could hear water shaking around somewhere in my 2013 Tahoe SSV on my drive to work in the morning. I pulled the weather strip slightly back on the right rear passenger door, and water starting leaking out everywhere. Where could this water have come from? The seams of the right rear window?


View attachment 199448 View attachment 199449 View attachment 199450


The day I picked up this Tahoe from IL, I drove it back to MD through some snow up in PA. The roads were heavily salted. The next day, I noticed salt build up around the driver door weather strip. Later that week I removed and plugged the police spotlight. There is still a notch cut out in the door. The weather strip appears to be cut and worn down with a little rust by the feet. Since removing the spotlight, I haven't noticed any more leaks, but my guess is that the whole weather strip needs to be replaced. Anyone have experience with this problem?


View attachment 199451
that bottom door seal condition is normal I haven't seen one that wasn't exactly like that, just poor design
 

XEALOT

Member
Joined
Oct 17, 2017
Posts
37
Reaction score
78
Location
Northern MI
My weather strip looks like yours, they are like 90bucks on EBay.

The water draining from the door is normal, However if you hear schloshing around that means that the door drains are clogged.

Also make sure your roof holes are properly plugged.


Thirdly, Welcome to TYF from NC


X2 what he said :imo:

I had water sloshing when I first bought my PPV. I cleaned the door drains with pipe cleaners, and I haven't had a problem since.
 

spectralen

Member
Joined
Nov 10, 2017
Posts
70
Reaction score
54
I also had water coming out of the bottom of the door when I picked it up in Wisconsin. Cleared drain holes is the fix.
 

CobraKing

Full Access Member
Joined
May 29, 2017
Posts
160
Reaction score
79
@MD Tahoe 13 Just curious but how did you plug up the spot light notch? I used Gorilla Tape under the weatherstrip and cut out a half circle for the actual notch in the driver door frame. Just wondering if there was an OEM or aftermarket solution that's somewhat cleaner.

@spectralen @XEALOT Could I trouble either of you to take a picture of the actual door drains on the passenger doors? My rear passenger is holding a ton of water and I have to pull the weatherstrip at the bottom to get it out. Not sure if that's the area that I should take a look at or somewhere else.
 

PG01

Supporting Member
Joined
Nov 6, 2016
Posts
14,917
Reaction score
18,378
Location
Up here to the right
@MD Tahoe 13 Just curious but how did you plug up the spot light notch? I used Gorilla Tape under the weatherstrip and cut out a half circle for the actual notch in the driver door frame. Just wondering if there was an OEM or aftermarket solution that's somewhat cleaner.

@spectralen @XEALOT Could I trouble either of you to take a picture of the actual door drains on the passenger doors? My rear passenger is holding a ton of water and I have to pull the weatherstrip at the bottom to get it out. Not sure if that's the area that I should take a look at or somewhere else.
The plastic rivets are the drains and a few more oval holes under the weatherstrip
 
OP
OP
MD Tahoe 13

MD Tahoe 13

TYF Newbie
Joined
May 15, 2018
Posts
23
Reaction score
7
@MD Tahoe 13 Just curious but how did you plug up the spot light notch? I used Gorilla Tape under the weatherstrip and cut out a half circle for the actual notch in the driver door frame. Just wondering if there was an OEM or aftermarket solution that's somewhat cleaner.

@spectralen @XEALOT Could I trouble either of you to take a picture of the actual door drains on the passenger doors? My rear passenger is holding a ton of water and I have to pull the weatherstrip at the bottom to get it out. Not sure if that's the area that I should take a look at or somewhere else.
Thanks everyone for the input. Really helpful.

CobraKing: I have not yet fixed the notch. The body shop recommendation was to replace the whole door rather than have a new piece of metal welded into the notch. I doubt I will do that. Another inexpensive suggestion was to cut a piece of hard plastic to match the notch, use an epoxy glue to attach it, and then sand and paint over w/ clear coat. Not perfect, but you probably wouldn't notice it. If my SSV wasn't white, I probably wouldn't fix it. It's just more noticeable with a white body.

And thanks for the weather strip recommendation, 2011SSVHOE. That should help prevent any other moisture from seeping in.
 

CobraKing

Full Access Member
Joined
May 29, 2017
Posts
160
Reaction score
79
@MD Tahoe 13 Thanks for the reply. The other option you have is finding a white door from a Tahoe/Yukon. The Gorilla Tape blended in quite well on my black PPV.

@Galante Thanks for the reply. I'll remove the entire weather strip and see what's blocking those holes.
 

Forum statistics

Threads
132,425
Posts
1,867,908
Members
97,102
Latest member
Tusz
Top