Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Are they just the trim pieces to hold fogs?After buying my 2019 I binge read this thread. I wasn't going to do any mods, but you know how that is. Here is my first one... installed tow hooks. Not sure if I am going to reinstall my front license plate holder and drill through the new fascia. If anybody wants the old fascia for fog lights, it's free for pickup in the Dayton Cincinatti area.
View attachment 438867
View attachment 438866
It is the plastic fascia (that black piece). Part #12 in this drawing. There are four different ones. GM has them plain, with fog lights only, with foglights and ONE tow hook (if you have adaptive cruise), and with fog lights and TWO tow hooks. I bought part number 22936496Are they just the trim pieces to hold fogs?
i'm going to add fogs to the wifes burb eventually, but I believe hers has that piece already and the fog light area just has a plastic cover/insert.It is the plastic fascia (that black piece). Part #12 in this drawing. There are four different ones. GM has them plain, with fog lights only, with foglights and ONE tow hook (if you have adaptive cruise), and with fog lights and TWO tow hooks. I bought part number 22936496
View attachment 438873
View attachment 438874
The one I have for free local pick up has two fogs only.
I just measured the crap out of mine then used a dremel to cut it. I also had a grander plan. The inner parking sensors also were relocated.It is the plastic fascia (that black piece). Part #12 in this drawing. There are four different ones. GM has them plain, with fog lights only, with foglights and ONE tow hook (if you have adaptive cruise), and with fog lights and TWO tow hooks. I bought part number 22936496
View attachment 438873
View attachment 438874
The one I have for free local pick up has two fogs only.