What did you do to your NBS GMT800 Tahoe/Yukon Today?

[Fless]

@Sam Harris: From one of your best friends high up in the gubment:



I'll even give you a ride home!

 

[Sam Harris]

Your truck is basically done-for, @Sam Harris, might as well give up on it so bring it over and I'll take it off your hands!

Or I can pick it up.... and those parts that have been accumulating.

Yessir! Come on over, and pick up these boxes of things.. I guess I won't be needing them anymore.

 

[Scottydoggs]

I was expecting this myself, but mine only seems to outline the proper procedures for raising the vehicle, and swapping out the tire. Perhaps they changed these instructions over the years..?

all my trucks had both on the tag on the bag. where to lift from and how to store it. had a 97 and 03 pick ups and the 05 hoe. also in the owners manual iirc ive seen it there too. im one of them ppl who actually reads the manual of cars i own lol

 

[Sam Harris]

Yessir! Come on over, and pick up these boxes of things.. I guess I won't be needing them anymore.

Oh yeah, and I have about 6 gals of Dexron6 trans fluid, and 7 qts of Delco Dexron II 5W30, and a sweet Performabuit trans and FTI torque converter at the shop. Just lemme know when you're ready, and I'll give you the address.

 

[Sam Harris]

all my trucks had both on the tag on the bag. where to lift from and how to store it. had a 97 and 03 pick ups and the 05 hoe. also in the owners manual iirc ive seen it there too. im one of them ppl who actually reads the manual of cars i own lol

Same! I read that s h i t cover to cover! I want all the deets!

 

[MassHoe04]

Just rusted on the edges towards the bottom, underneath everything is solid. The body shop tech said since I'm keeping it, might as well go ahead and get them replaced. All new metal for rockers and dog legs. $4000 and change.

Mine does not need work on doglegs and a quote I got from a reputable local shop was $3500 just for rocker panel. Given the work to be done, I'd say your quote is really pretty reasonable!

I am stuck! I don't have $3k to drop on rocker panel repairs on my $6.5k Tahoe. I have to do something this year or next. I may look at slip-on replacement panels and a Harbor Freight welder. DIY won't be as perfect, but just something to keep it on the road another couple of years, when the loan is paid off and I am free to sell it.

 

[Keviebear86]

Mine does not need work on doglegs and a quote I got from a reputable local shop was $3500 just for rocker panel. Given the work to be done, I'd say your quote is really pretty reasonable!

I am stuck! I don't have $3k to drop on rocker panel repairs on my $6.5k Tahoe. I have to do something this year or next. I may look at slip-on replacement panels and a Harbor Freight welder. DIY won't be as perfect, but just something to keep it on the road another couple of years, when the loan is paid off and I am free to sell it.

I had thought about going that route, but after sitting down and talking with the girlfriend we both decided that we like it enough to keep it long term. Doing the "cheap" fixes only get so far. I have spent more money in the 2 sets of wheels and tires I've bought for this than what I bought it for. A newer Tahoe is upwards up $50k+ and we can't justify that kind of spending with four kids and a zoo at home (dog, cat, snakes, reptiles). Not knocking your choice, sounds like you're planning to get rid of it after a while. If I weren't keeping this one I'd skip the rust repair and just drive it.

 

[MassHoe04]

I had thought about going that route, but after sitting down and talking with the girlfriend we both decided that we like it enough to keep it long term. Doing the "cheap" fixes only get so far. I have spent more money in the 2 sets of wheels and tires I've bought for this than what I bought it for. A newer Tahoe is upwards up $50k+ and we can't justify that kind of spending with four kids and a zoo at home (dog, cat, snakes, reptiles). Not knocking your choice, sounds like you're planning to get rid of it after a while. If I weren't keeping this one I'd skip the rust repair and just drive it.

Yeah. No worries. My Jeep had too much fail all at once. I didn't have the luxury of time to make the repairs or the money. I had to roll into another daily driver in a hurry! Used cars around $6-7k are usually still junk, but was the price point I had to stick to. I found my 04 Tahoe Z71 for $6.5k. Interior was one of the nicest i had seen on anything that old and with 186k miles on it. Mechanically runs like a champ. Smooth and reliable! Unfortunately the rockers were already gone and I am guessing there is hidden rust that I'll never be able to get ahead of. While it runs fantastic, seems to be reliable as heck as a daily driver, super comfortable and is fairly presentable still... I figure the body and frame may start unravelling faster than I can keep up with things.

I'll know more this summer, as I start to crawl around, inspecting more, brushing and painting things. I hope I can keep it forever. I really love it! In the meantime, I just have to do the best I can DIY and keep costs as low as possible. If I hit the lottery, I'll go looking for another totally rust-free rig and do some kind of build...

I'll post how things come out, if I tackle the rockers myself. Whenever that might be. Until then, the plastic Z71 trim panels have been doing a great job of covering things up, so I can pretend rockers are still there.

 

[iamdub]

Mine does not need work on doglegs and a quote I got from a reputable local shop was $3500 just for rocker panel. Given the work to be done, I'd say your quote is really pretty reasonable!

I am stuck! I don't have $3k to drop on rocker panel repairs on my $6.5k Tahoe. I have to do something this year or next. I may look at slip-on replacement panels and a Harbor Freight welder. DIY won't be as perfect, but just something to keep it on the road another couple of years, when the loan is paid off and I am free to sell it.

Unless you're completely opposed to doing body work, and if you determine it's worth saving, I say go for it. The experience gained from the body work and welding and satisfaction and pride of doing it yourself is worth it. Your rig is a basic white and not a metallic, so the painting aspect is even better for a novice/DIY'er. Plus you'll have a reason to add a new tool (welder) to your arsenal that I think any wrench monkey should keep around.

 

[Walchit]

Unless you're completely opposed to doing body work, and if you determine it's worth saving, I say go for it. The experience gained from the body work and welding and satisfaction and pride of doing it yourself is worth it. Your rig is a basic white and not a metallic, so the painting aspect is even better for a novice/DIY'er. Plus you'll have a reason to add a new tool (welder) to your arsenal that I think any wrench monkey should keep around.

I'm gonna weld mine for sure, now that I have so much money in this thing. I have an old Lincoln stick welder, but I need to run the plug for it. I think I might be able to hook it up to the old storm shelter/shed power that got dug up. I've watched my dad's buddy weld in rockers and cab corners, but I have minimal welding experience, at least with thin material.

It was looking like patch panels are pretty pricey even for a diy