What did you do to your NBS GMT800 Tahoe/Yukon Today?

[05Single]

I went with just yellow flashing because there's another white LED that flashes white in my housings so it alternates between the two, one flashing white and the other yellow.

Your talking about the 194 marker light ?

 

[brian.roberts.1293]

Here is another option to the resistors. I did this to avoid the heat and having to do multiples.

http://www.tahoeyukonforum.com/index.php?threads/76076/

Sent from my SAMSUNG-SM-G935A using Tapatalk

 

[BigDaddy13440]

Add your resistors and replace bulb. & on mine i did both of my resistors on the front and both still hyper flashed so what i had to do is open the t-connector back up and squeeze the metal piece real good and checked them again, worked fine ever since @Tonyrodz


Sent from iPhone 7 plus using Tapatalk Pro

So all you have to do is splice the resistors in, and swap the bulbs for switchback LED's? there's no need to splice any additional wiring?

 

[kwOH]

So all you have to do is splice the resistors in, and swap the bulbs for switchback LED's? there's no need to splice any additional wiring?

Yep. Check the link above from @brian.roberts.1293 for another option.


Sent from iPhone 7 plus using Tapatalk Pro

 

[brian.roberts.1293]

Also I think most resistors are directional if I remember correctly I would try switching the wires on the resistors first

Sent from my SAMSUNG-SM-G935A using Tapatalk

 

[Rocket Man]

Here is another option to the resistors. I did this to avoid the heat and having to do multiples.

http://www.tahoeyukonforum.com/index.php?threads/76076/

Sent from my SAMSUNG-SM-G935A using Tapatalk

I did get an electronic flasher module too for the turn signals but still needed load resistors for the brake lights (cruise control inop) and front markers ( main brake lights inop) . I guess when I replaced every single light with LED my 02 wasn't ready for it.

 

[shakedown067]

I've had a little fun with my ole girl lately. Dual batteries, double-din head unit, rear view mirror dash cam, and head rest monitors for my boys (4 & 6).





I'm REALLY ready to install this, but need a new driveshaft first. Damn thin ass aluminum.

 

[TheAutumnWind]

@mmeachem the eagle eye can be placed inside the housing freely so I wedge a washer inside with the eagle eye with the stud sticking out and placed a washer on before tightening it with the supplied with the leds and added just a dab of loctite


Sent from Dugar's iPhone 7 Plus using Tapatalk

Hrm. Well thats about as simple as can be.

 

[DDenali]

I've had a little fun with my ole girl lately. Dual batteries, double-din head unit, rear view mirror dash cam, and head rest monitors for my boys (4 & 6).





I'm REALLY ready to install this, but need a new driveshaft first. Damn thin ass aluminum.

LSA blower oh my worddddddd


Sent from Dugar's iPhone 7 Plus using Tapatalk

 

[Countryboy07]

I'm REALLY ready to install this, but need a new driveshaft first. Damn thin ass aluminum.

LSA blower is useless, better send to me so I can dispose of it properly. Lol