What did you do to your NBS GMT800 Tahoe/Yukon Today?

[Tonyrodz]

Debadged my hoe after all these years. View attachment 74392

And cause race truck lol..View attachment 74395

Sent from my SAMSUNG-SM-T377A using Tapatalk

View attachment 74392

Where you gonna put it?

 

[Tonyrodz]

Picked up my electric fans, made sure they worked, they do. Can't beat $50. Now just gotta get the harness. Also picked up 3 used 22 inch tires for a pretty good price. Also got some news that just pissed me off. Went to an exhaust shop to figure out what to do about the y pipe and prop shaft. They can't get it to work. Besides the y pipe, the driver side header tubes are also in the way! So, if I want 4wd I'm gonna have to see if I can get a custom prop shaft made. Sux! Also saw I have maybe 3-4 spark plug wire boots laying on the headers. Had one arcing because I tried lifting it out of the way and the insulation pulled back. Fixed that one, so I have to figure out what to do about that. Maybe find some wires with shorter boots or something. On a positive note, she runs like a scalded dog and sounds great doing it. Still gonna put in my mbrp. This thing rocks! Took it up to around 110, and she was begging for more!! Still handles like shit tho, rear end sways side to side going over dips and bumps.

 

[Rocket Man]

Picked up my electric fans, made sure they worked, they do. Can't beat $50. Now just gotta get the harness. Also picked up 3 used 22 inch tires for a pretty good price. Also got some news that just pissed me off. Went to an exhaust shop to figure out what to do about the y pipe and prop shaft. They can't get it to work. Besides the y pipe, the driver side header tubes are also in the way! So, if I want 4wd I'm gonna have to see if I can get a custom prop shaft made. Sux! Also saw I have maybe 3-4 spark plug wire boots laying on the headers. Had one arcing because I tried lifting it out of the way and the insulation pulled back. Fixed that one, so I have to figure out what to do about that. Maybe find some wires with shorter boots or something. On a positive note, she runs like a scalded dog and sounds great doing it. Still gonna put in my mbrp. This thing rocks! Took it up to around 110, and she was begging for more!! Still handles like shit tho, rear end sways side to side going over dips and bumps.

Did you ever get new jounce stops installed in the front?

 

[Tonyrodz]

No, they sent me the rears instead, so I'm gonna put those on in the rear, but the weather hasn't been cooperating. Front feels stable tho, the rear almost feels scary.

 

[dhulsey779]

Picked up my electric fans, made sure they worked, they do. Can't beat $50. Now just gotta get the harness. Also picked up 3 used 22 inch tires for a pretty good price. Also got some news that just pissed me off. Went to an exhaust shop to figure out what to do about the y pipe and prop shaft. They can't get it to work. Besides the y pipe, the driver side header tubes are also in the way! So, if I want 4wd I'm gonna have to see if I can get a custom prop shaft made. Sux! Also saw I have maybe 3-4 spark plug wire boots laying on the headers. Had one arcing because I tried lifting it out of the way and the insulation pulled back. Fixed that one, so I have to figure out what to do about that. Maybe find some wires with shorter boots or something. On a positive note, she runs like a scalded dog and sounds great doing it. Still gonna put in my mbrp. This thing rocks! Took it up to around 110, and she was begging for more!! Still handles like shit tho, rear end sways side to side going over dips and bumps.

If I recall you wanted to lower it, so do a 2/3 drop, free travel mod, & nice set of Belltech sway bars and the hoe should be dialed in just about right!


Sent from my iPad using Tapatalk

 

[bottomline2000]

Should be a boost gauge for that race truck.

Haha, power is nothing without control. Those ARP headstuds are not just for decoration. In due time.

Sent from my SAMSUNG-SM-T377A using Tapatalk

 

[bottomline2000]

Where you gonna put it?

I'm going to mount it on the steering column. Need to figure out which one to get.

Sent from my SAMSUNG-SM-T377A using Tapatalk

 

[Tonyrodz]

I have a complete set of spare gauges from my GN that I was going to put in the Hoe, but too much work and I think it'll look too cluttered.

 

[bottomline2000]

Picked up my electric fans, made sure they worked, they do. Can't beat $50. Now just gotta get the harness. Also picked up 3 used 22 inch tires for a pretty good price. Also got some news that just pissed me off. Went to an exhaust shop to figure out what to do about the y pipe and prop shaft. They can't get it to work. Besides the y pipe, the driver side header tubes are also in the way! So, if I want 4wd I'm gonna have to see if I can get a custom prop shaft made. Sux! Also saw I have maybe 3-4 spark plug wire boots laying on the headers. Had one arcing because I tried lifting it out of the way and the insulation pulled back. Fixed that one, so I have to figure out what to do about that. Maybe find some wires with shorter boots or something. On a positive note, she runs like a scalded dog and sounds great doing it. Still gonna put in my mbrp. This thing rocks! Took it up to around 110, and she was begging for more!! Still handles like shit tho, rear end sways side to side going over dips and bumps.

Somebody is having fun lol! Bad Front sway bar links or jounce stops can make the rear feel weird. Sucks about the prop shafts. They really did a number on your header y-pipe setup. I'm using shorter Taylor wires made for my 05 GTO I believe and fiberglass wire covers u can find on ebay for cheap. Oreillys sell them for $20 for 2 but u can buy a whole set less on ebay They can handle the heat.

Picked up my electric fans, made sure they worked, they do. Can't beat $50. Now just gotta get the harness. Also picked up 3 used 22 inch tires for a pretty good price. Also got some news that just pissed me off. Went to an exhaust shop to figure out what to do about the y pipe and prop shaft. They can't get it to work. Besides the y pipe, the driver side header tubes are also in the way! So, if I want 4wd I'm gonna have to see if I can get a custom prop shaft made. Sux! Also saw I have maybe 3-4 spark plug wire boots laying on the headers. Had one arcing because I tried lifting it out of the way and the insulation pulled back. Fixed that one, so I have to figure out what to do about that. Maybe find some wires with shorter boots or something. On a positive note, she runs like a scalded dog and sounds great doing it. Still gonna put in my mbrp. This thing rocks! Took it up to around 110, and she was begging for more!! Still handles like shit tho, rear end sways side to side going over dips and bumps.

Sent from my SAMSUNG-SM-T377A using Tapatalk

 

[#1taho]

Not the best pictures but here you go.

Lol. You know how picky we all are about pictures? Reduced to two year old status and paint-by-numbers. Lol