What did you do to your NBS GMT800 Tahoe/Yukon Today?

[95escahoe]

I got all my t10 leds in. Much better. Need festoons though. What is everybody running?

I need bright puddle lights, map lights, second row, third row and trunk still. I prefer ~5000k "pure white"

I bought all my LED's off the sticky on LED's on here nice and bright


Sent from my iPhone using Tapatalk

 

[ATIII]

Is there a recent Big 3 thread that's been done? I'm out here trying to figure out how I'm gonna do this and I noticed all I have from battery is 4 gauge to the splice in the red box and a piece of 8 gauge from the splice block to the alternator. So I'm just gonna run a piece of 1/0 gauge from the battery directly to the alternator. And ground the alternator directly to the frame with 1/0. Where should I hook to the alternator for the ground?

Sent from the *******, mid-push.

 

[ATIII]

So upon further review that little ass 8 gauge piece of wire is the only thing putting my alternator in series. That's going to be remedied shortly.


Sent from the *******, mid-push.

 

[HiHoeSilver]

So upon further review that little ass 8 gauge piece of wire is the only thing putting my alternator in series. That's going to be remedied shortly.


Sent from the *******, mid-push.

Yup. Hence the lights dimming when the ac kicks in, or multiple windows moving, etc... Now fix its little wagon!

 

[TheAutumnWind]

So upon further review that little ass 8 gauge piece of wire is the only thing putting my alternator in series. That's going to be remedied shortly.


Sent from the *******, mid-push.

Yes its a fuseable link.

Its designed to burn up if its grounded out. I prefer an actual fuse and a nice 1/0 cable personally..

 

[TheAutumnWind]

Yup. Hence the lights that divergence the ac kicks in, or multiple windows moving, etc... Now fix its little wagon!

nice job autocorrect

 

[ATIII]

Yes its a fuseable link.

Its designed to burn up if its grounded out. I prefer an actual fuse and a nice 1/0 cable personally..

Do I need to fuse it twice? Once for the battery run and once for the starter end?


Sent from the *******, mid-push.

 

[ATIII]

Or leave it as is and just run a new alternator to battery with a fuse?


Sent from the *******, mid-push.

 

[HiHoeSilver]

Or leave it as is and just run a new alternator to battery with a fuse?


Sent from the *******, mid-push.

Go through this thread for good measure.
http://www.gmfullsize.com/threads/how-to-the-big-3.106041/

 

[ATIII]

Go through this thread for good measure.
http://www.gmfullsize.com/threads/how-to-the-big-3.106041/

Thanks man!


Sent from the *******, mid-push.