What did you do to your NBS GMT800 Tahoe/Yukon Today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

ScottyBoy

Full Access Member
Joined
Jun 27, 2010
Posts
2,608
Reaction score
1,817
Location
Shreveport, La
Hey guys, I want to get your honest opinion about something. I've been selling a bunch of OEM E-fan harnesses on here and several other forums. They seem to be a pretty hot seller. But most of them I have to do some minor wire repairs because of cuts or nicks in the wires. I also have a bunch of plugs and pins in stock because the fan plugs are damaged on a lot of them as well. I've just been doing some thinking. If I am basically rebuilding some of these fan harnesses, why don't I just make some COMPLETELY from scratch. I'd just need to source some relays that would handle the current. I've got pretty much everything else I need.

IMG_20171211_121218459.jpg
 

kwOH

Banned
Joined
Jun 19, 2016
Posts
2,958
Reaction score
3,514
Hey guys, I want to get your honest opinion about something. I've been selling a bunch of OEM E-fan harnesses on here and several other forums. They seem to be a pretty hot seller. But most of them I have to do some minor wire repairs because of cuts or nicks in the wires. I also have a bunch of plugs and pins in stock because the fan plugs are damaged on a lot of them as well. I've just been doing some thinking. If I am basically rebuilding some of these fan harnesses, why don't I just make some COMPLETELY from scratch. I'd just need to source some relays that would handle the current. I've got pretty much everything else I need.

View attachment 188593
I might need one soon.....lol
 

drowssap

Full Access Member
Joined
Apr 15, 2017
Posts
265
Reaction score
289
Location
Colorado
It will be one thing to just be another aftermarket harness thrown in to the mix but another if you can make it work as well as OEM. I have the confidence that you could pull it off!
 

ScottyBoy

Full Access Member
Joined
Jun 27, 2010
Posts
2,608
Reaction score
1,817
Location
Shreveport, La
It will be one thing to just be another aftermarket harness thrown in to the mix but another if you can make it work as well as OEM. I have the confidence that you could pull it off!

I was wondering about the 80amp relays like @Rocket Man used to redo his aftermarket fan harness. He didn't have any failure or signs of overheating on the relays after swapping to those.
But here's the biggest question: What do you guys think I can sell them for? I've seen aftermarket E-fan harnesses sell from anywhere as low as $100 to as much as $180.
 

Forum statistics

Threads
132,381
Posts
1,867,111
Members
97,022
Latest member
Torrance1978
Top